Search Results for ‘1998’

I'm repairing many electrical problems. Neutral light goes off if I turn on headlights. Start button doesn't work, so I have to jump solenoid. Cooling system doesn't work (tested fan, it works). Going to check continuity on the lighting system. Do a resistance check on temp sensor. Any...

I cleaned my sliders and weights and regreased it all.. Installed a new belt and put it back together... It made a great improvement. However.. After an hour it jammed up and broke the belt.. The weights had came out and stuck in the sheave housing preventing it from moving. I had spline...

I've been working on a friend's '98 Grizzly 660 and now I can't get the idle to go down. Put a few good turns on the idle adjustment knob and the idle is still to high. I know its not a carburetor issue because I cleaned and rebuilt it. I honestly just want to get this thing working so I can...

Hi all - I have a 1998 Big Bear 350 4x4 and am looking for advice on installing a front winch. I searched various web sites that sell winches, but I am having a difficult time finding a winch MOUNT that will fit my machine. Can anyone recommend a manufacturer or a model number that will work...

I am in the process of rebuilding the entire rear end (bearings and seals) on my Big Bear. Ordered the parts from a Yamaha dealer close by for the middle gear seals and o-ring. Can someone tell me what the correct part number is for the front facing lower seal which drives forward transaxle? I...

My bike started leaking fuel from the carb. over flow line so I took the carb to the dealer and had it cleaned and a new valve and seat installed. I took the carb home and installed it only to find that it was still leaking. I took the carb back to the dealer where it was inspected and another...

Hello all...new to forum....I just bought a 1998 Grizzly 600. ITP Mudlites are worn out. I am looking to upgrade tires/wheels. I have a few questions. My current setup is 25x8-12 (12"dia.) on the front and 25x11-10 (10" dia.) on the rear. I am looking at going with either 26" Maxxis...

I just bought a 1998 grizzly. Some time when you put it in 4 wheel drive or turn the lights on it loses electrical power and the neutral light will go out and the electric start will not work. Basically everything electrical quits working.When it does this you can also hear one of the relays...

Hi I just got a new to me, Grizzly 600 1998. I have a question about it, is it normal that the steering is very hard to turn ? I tried another Grizzly before and I dont remember it to be that hard. I mean, I have to put some real force on it to turn. I'm not on 4wd and it is very hard to...

Does anyone know of an aftermarket 2" receiver hitch for a 1998 Grizzly 600? I've searched quite a bit but haven't found any that say they are specifically for a 1998. Or, do I have to have a shop weld one on? I don't like the one that bolts onto the existing hitch. Thanks, Brad