Grizzly Riders Forum banner
1-20 of 26 Results
  1. Parts For Sale
    I have a Yamaha service manual for a 2002 YFM660FP, LIT-11616-15-01 for sale. Condition of manual is VERY GOOD. For the most part it looks like it has never been used. Price is $45 plus shipping to your location. I am located in Bend, Oregon. Preferred payment method is Paypal. This works...
  2. New Member Introductions
    Just did the timing chain and after getting it back together I went to start it and it won't fire it spits gas and exhaust fumes out the intake. And seems like it should have more compression it had around 215 when I checked it before I tore it apart I can't remember the exact number but I know...
  3. New Member Introductions
    2002 grizz 660 11.1 high comp hotcams stage 2 raptor springs k&n clamp on snorkels ra Hey guys the wheeler sat for a couple years got it home cleaned the carb changed the oil ran great for about 3 miles easy riding. Started to act like it was running out of fuel then a couple little back fires...
  4. Grizzly Chassis & Body
    Trying to find out if a 2002 front diff is changeable to other years. Thanks
  5. New Member Introductions
    Hello All Bought a 2002 660 grizz 5 years ago, ran it for a couple years and it started to backfire and hard start when hot, I parked it and now am wanting to go back to it and start repairs , I feel possible valve issues for starting when hot but am unfamiliar with the habits of the 660, or...
  6. General Discussion
    Hey guy my sons 2002 grizzly 660 is making a loud clunk when in low or high feels like it popping in and out of gear. We've replaced the one way bearing and been through the clutch with no luck any input will help thanks
  7. Grizzly Tech Tips
    Dear Forum, Can anyone advise what the fixed air jet on the right side of the Mikuni N224.103 carb does?
  8. Grizzly Engine & Transmission
    I have been thinking of UNI air filters ?? Which one is better k&N or UNI air filters ?? Sent from my SM-G900FD using Tapatalk
  9. Grizzly Engine & Transmission
    I got a 2002 yamaha grizzly 660 and I am thinking of installing exhaust . What is the best exhaust ?? Sent from my SM-G900FD using Tapatalk
  10. Parts For Sale
    Just bought the Grizz. Its way to loud for me. The previous owner said he removed the silencer in the stock exhaust and thats why its loud. So I need to buy the silencer if thats so or just a used stock replacement. Please email or text me. [email protected] 6154172862 Thanks Guys
  11. Official Clutch Forum
    My quad just started to act like it was out of gas with any kind of load on it(trailer, cargo, person etc..), until you reached faster speeds, runs fine in reverse and neutral. I heard a chirp from the CVT area a few time just prior to this. Anyways I was told it was most likely a bad belt in...
  12. Grizzly Chassis & Body
    Does anyone recall if one can replace the outer boot without removing and disassembling the inner boot and joint? I watched several videos and one person stated that some axles' outer joint keeper ring was not easily removed to allow the cv bearing/joint to slide off. Others showed a snap ring...
  13. New Member Introductions
    Hello every one I'm new to the form. Just working on my 2002 kodiak and the front diff went, i got a use diff. in off a 2005 unit with both axels. but notice my steering knuckles are damaged. Though I might change rest of front end to newer model. has any one done this. Axels and spine count...
  14. Grizzly Electrical & Lighting
    Hello all, I just purchase an '02 Grizzly 660 and the high temp light is on all the time. Even bone cold. The previous owner said it was a sensor and has just been riding it without issue. He said it used to flash and then just stayed on. I've read that it is more than likely a break in the wore...
  15. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Does anyone have the head specs for a 02 Big Bear 400 4X4? I have to replace the gasket on the top end.
  16. Grizzly Talk
    Help!! I need front Axle's ASAP and of course a 2002 is one of a kind! I have 2 Gorilla's for a 02 but they are way to long. I will trade or sell if the price is right. They are mint and have about 50km on them. email me @ [email protected]
  17. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I recently had an issue with my carb leaking all its fuel out, so i installed a rebuild kit the new needle and seat solved the leak but now it idles great but as soon as I touch throttle it sputters revs up and dies it didnt do this before the carb kit so i know its somewhere in carb any...
  18. Pictures & Videos
  19. Grizzly Engine & Transmission
    Does anyone know anywhere that one can get a good deal on axles and or is anyone parting out there quad by chance? Cheers
  20. Grizzly Talk
    Hey guys, I got a 2002 Grizzly 660 and when I got it it had been sitting for a year and a half. The previous owner had left the gas on and the float stuck open and the case filled up with gas. I have replaced the needle and seat and cleaned the whole carb and also flushed the oil 2 or 3 times...
1-20 of 26 Results