Grizzly Riders Forum banner
1-19 of 36 Results
  1. Grizzly Tech Tips
    Hello, I have searched the forums but could not find anything that matches my issue, I have a 2005 660 with a no start seems to lock up when the spark plug is in and cranks over fine when it's out, we have replaced the starter, battery ,carb and relay, and had the valves adjusted, and can not...
  2. Rhino Discussion
    Anybody have a 660 engine for sale for my 2005 Rhino?
  3. New Member Introductions
    I have a 2005 Yamaha Rhino 660 and I am looking for a 660 engine.
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    No spark. Start button tests ok with meter but no effect when pushed, can engage starter by jumping relay (replaced solenoid - same deal.). Not sure where to go from here?
  5. Grizzly Talk
    I just recently swapped for a 660 grizzly and when u turn the key on nothing is showing up on the display like the battery is dead but u can jump it across the solenoid and it will turn over like normal but it is getting no fire and I done changed the cdi, pick up coil, and stator can anyone...
  6. Kodiak/Big Bear/Bruin/Wolverine Discussion
    got a 05 kodiak 450 my buddy crashed it and broke the front plastics and bent the front bumper, looking to maybe get aftermarket bumper if they make a nice one or should i just go factory
  7. New Member Introductions
    I bought a very well used 450 about 10 momths ago. It has been out in the field several times. I keep it in an outdoor shed but one day I tried to start it and it ran for just a few seconds and Konked out. I tried to restart and got nothing. The lights would come on but it acted like there was...
  8. Grizzly Engine & Transmission
    Ok I'm a yamaha lover I've had like 4 Grizzlies, 3 Big Bears, & a Kodiak! And none of them has done what this 1 is doing! Ok it's a 2005 Grizzly 660, has the 686 big bore kit, epi mudder clutch kit, jetted carb, hmf exhaust, & snorkeled with 2" pipe. It has ran fine tile a week ago when the...
  9. Grizzly Electrical & Lighting
    My grizzly was running great a month ago but has been sitting since. I took it out today to let it run and it won't start. When I push the ignition button all I hear is a "click" noise. Under the seat where the hot wire goes to the battery seams to be where the noise is coming from. I checked...
  10. Kodiak/Big Bear/Bruin/Wolverine Discussion
    hey guys working on my Kodiak 450..its an 05. currently have the cylinder head off. blown head gasket! have a top end rebuild kit and ready to replace gasket, my question is as both the cylinder head and cylinder share the same six bolts should I replace the cylinder gasket as well? also does...
  11. New Member Introductions
    i just bought a 2005 kodiak 500 u have to jump the silinoid to start it and when u get it atarted it wont drive does anyone aknow what the issue could be
  12. ATVs For Sale
    I'm selling my 2005 Yamaha Kodiak 450. It has approximately 2286 miles, and has only been ridden around my property to work and on the trails in Bell & Harlan counties in Eastern KY, and 2 trips to Hatfield McCoy. This ATV is in excellent condition, and needs absolutely nothing. I just installed...
  13. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Ive recently acquired a 2005 Kodiak 400 (YFMF4AT). When looking for aftermarket parts it seems there often aren't parts listed for it. EG All Balls rear diff kit and tie rod upgrade kit. Is the Kodiak 400 with independent rear suspension a bit of a white elephant? I checked out some of...
  14. New Member Introductions
    the winch motor is turning however the cable will not move. I am trying to get the winch out and don't know what needs to come off to get winch out. is it possible to repair while still mounted? or do I need to remove? thanks, chris
  15. Parts For Sale
    Still have the engine parts,display,handlebars/controls and suspension about everything besides plastics,wheels,primary and differentials.
  16. Member's Rigs
    This is from the day I picked up my '05 660 in Indiana last September... My rig is a 2000 F-250 with 7.3 Powerstroke diesel. Cold air intake, 6637 filter, Bullydog PowerPup programmer, larger van turbo with Wicked Wheel impeller, Superlifts 4 and 1/2" lift, BF Goodrich 35" Radial T/A tires...
  17. ATVs For Sale
    Up for sale is my 2005 Kodiak 450 a.k.a. THE YAK! It has been a great bike for me but I have decided to go a different route and try the sport bike scene for a while. It has all the right mods so you can use it as a hunting/work bike when needed...then take it to your favorite atv park and ride...
  18. New Member Introductions
    Hi, I was wondering if someone could tell me what my problem may be. I have already took my clutch off and regreased it and now i'm stuck and don't know what else to do. But anyway - while the motor is running when i put the transmission into gear it just jumps and stalls out, i have to put it...
  19. ATVs For Sale
    I have a red 2005 Yamaha Grizzly 660 with the big bore kit on 27.5 Outlaws. Just replaced all 4 wheel bearings and did a complete rebuIild on both front and rear ends. Zero drive time on all new bearings. Bike has a edelbrock carb on it that I can't get to tune right bike won't idle ordered a...
1-19 of 36 Results