Grizzly Riders Forum banner
350
1-20 of 85 Results
  1. Grizzly Electrical & Lighting
    Bike was sitting for a long time , just clean carb and cranked it up and was running rough but running.... after a few min of running it killed and now I have no spark , I have replaced the stator , rectifier coil and cdi.... still no spark ! I’m just lost at what this can be... is there a...
  2. New Member Introductions
    How does the rear driveshaft come out
  3. New Member Introductions
    I have a 2011 350 Grizzly 2 wd. While using the winch to pull a log, the engine died. I feel like the engine overheated. The only visible damage is melted insulation on the ground wire at the coil. The engine turns over, but 12 volts does not go to the coil so there is no spark. I pulled the...
  4. Grizzly Talk
    Well I was able to get my 07 350 Auto 4x4 up and running again. Had to replace the choke cable, throttle cable, and the carb. She runs great now! Threads around here were a huge help! So thanks! New carb going in. https://photos.app.goo.gl/1SihZkVL9cpo7xtd6 First start...
  5. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Ok Im trying to rebuild a Big Bear rear end. Ive got all the parts for the swing arm pivot. Now Im stuck trying to find the bearing that is pressed on the axle. Is there a seal and bearing for that side? Also whats the best kit to rebuild the rear diff?
  6. Grizzly Talk
    On my 2010 350 I have switched out the calipers on my front end ... BUT for the life of me I cannot find any brakes for the rear? The axel does not have disc breaks in the back like the front, no drum brakes that I can find next to the wheels where the disks would be? According to the web...
  7. Grizzly Talk
    On my 2010 350 I have switched out the calipers on my front end ... BUT for the life of me I cannot find any brakes for the rear? The axel does not have disc breaks in the back like the front, no drum brakes that I can find? Are they in the final gear case somewhere?
  8. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I recently purchased a 2011 kodiak 350 that has a rear wet brake but it may as well not be there at all since it doesn’t work. If it weren’t for front brakes and engine braking my grandson would be in real trouble. My dealer has suggested that I buy a new rear differential but he has also said...
  9. New Member Introductions
    What is the best fix, besides buying a new one for a bent front carrier bumper on my grizzly 350 IRS 4 x 4? Right side hit tree,..anyone selling used parts on this site? Thanks in advance. Mark
  10. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Howdy all, A friend of mine just purchased a 2008 Big Bear 350, the guy that owned it just used it for plowing snow so there aren't very many miles on it. It is not liquid cooled, is there anything that he needs to be concerned about with this machine? it seems to be in pretty good shape...
  11. Grizzly Specifications
    I have a 2007 grizzly 350 and am having some issues with it. Neutral light is stuck on, can't accelerate forward without rev limiter kicking in in 2 wheel and 4 wheel drive. If I lock the differential in 4x4 it has full acceleration! Anyone got some ideas to help me out. Thanks in advance and...
  12. Kodiak/Big Bear/Bruin/Wolverine Discussion
    This is a recurring winter problem I have each winter. Trying to solve this before the winter comes again. I bought this a few years ago, rebuilt carburetor, new needle and seat, adjusted float height, idle air screw set at approx 2.5 turns. New fuel cock, inline fuel filter, valve clearances...
  13. Kodiak/Big Bear/Bruin/Wolverine Discussion
    last time i road was 3 month ago and is was running good but was having fuel injection problems and was shutting off. Went on vacation and when i got back it wasn't starting at all. So I replaced the battery, carburetor and relay next thing i can think of is the spark plug. any ideas? It almost...
  14. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I bought this a few years ago, rebuilt carburetor, new needle and seat, adjusted float height, idle air screw set at approx 2.5 turns. New fuel cock, inline fuel filter, valve clearances checked, air filter replaced, excellent compression. Starts great in warm weather, when down to 20 deg F or...
  15. Grizzly Engine & Transmission
    Good afternoon gents! I've been tasked with doing some repair work to my father in laws 08 grizzly and have a few weeks before deer season to finish it up. I'm have one HECK of a time finding any repair information on the net for this thing. The biggest problem is the rear drive shaft, the...
  16. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I have a 1987 Big Bear 350 that I am fixing up for bush use. After having it sit around for a month, I decided to move it to work on it and I noticed that it makes a grinding noise at higher speeds (or in high-range). However the noise isn't constant, only occurring at "x" amount of tire...
  17. Grizzly Electrical & Lighting
    Hi All, I recently bought a 2005 Grizzly 350 for my wife, she loves it and everything works perfect but we are wondering if it is possible to add the Computer\Display? This model has nothing more than a few dummy lights, no hours\miles meter, gas gauge nothing... I know other 05 models have...
  18. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Just Picked up a 1989 bigbear 350 for 400$. Its mint... I am going to build it into a mud slaying machine. I do a lot of custom fab work. nothing leaves my shop. I am planning to make a custom arched a-arm 6" lift and widen it about 7" with some 30" silverbacks. Do the same with the rear...
  19. Grizzly Tech Tips
    I noticed this black tube with a white end dangling and leaking fuel located on the side of the engine. If anybody knows why its leaking or if it should be attached to something please help and contact me back.
  20. Grizzly Electrical & Lighting
    I have gone through the complete harness and tested for continuity. Replaced the cdi unit. Replaced complete stator coils and pick up coil. Replaced regulator rectifier. Replaced ignition coil. Replaced ignition switch. Replaced spark plug and lead. Cleaned all connectors. Checked for voltage at...
1-20 of 85 Results
Top