Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 56 Results
  1. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey all, Just inherited a 90 something Kodiak. IT almost runs! Have some really basic questions though. How do I figure out the year? and where is VIN? Next question, it seems to be permanant 4x4. There's not switch or lever I'm missing somewhere right? Next question... I put it up on jack...
  2. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello, I’m new to atv’s. Picked up a 02 big bear for hunting, it’s in pretty good working order but I’ve have some concerns. it’s hard to shift into first. Is that normal? I adjusted to clutch and it seems to be better. 2-5 and reverse are easy. 2. when I first got it a week ago I was able to...
  3. Grizzly Talk
    I have a 2003 Kodiak 400 that I’m thinking of handing down to my son. I’ve been eyeing a new Grizzly, and I just need a push, Anyway, last weekend, I let my son ride the 400 to see if he was interested, while I suffered on an old Suzuki LT125. Still recovering. He stopped along the trail a...
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, looking for a little help. I have a 93 kodiak 400. It was leaking oil from the front output shaft on the transfercase, ordered new seal and went to put in. Removed t case from quad (yes nuts were loose possibly causing leak as alot mention) but seal is also damaged. Ut presses in...
  5. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello again yall, Need some advice on a lift kit for my kodiak. Been searching online for a kit but can only find 2" and that ain't gonna cut it. I have 28" mega meyhams on it now and they clear no problem. Just looking to gain ground clearance.. anyone know who makes a 4" kit for this bike? Or...
  6. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey yall New to the forums here! I have an 01 kodiak (YFM400A) ultramatic.. I got the bike on trade last summer. Didnt have high hopes, but after running it all summer basically stock except 26" Mud Lites, I ended up loving the little thing. Light as can be, and super low gear seem to be a...
  7. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Got a few questions, may seem simple and stupid, but feel the need for reassurance. Just picked up a 01 Kodiak 400 4x4 ultramatic. Felt like popping the side cover off because previous owner said they replaced stator, and I wanted to make sure it was done right. First noticed woodruff key on...
  8. New Member Introductions
    I was looking to see what plow others were using on there grizzlys . I have a 2008 with a moose plow but can't get the height and keep braking cables . I was looking to get a front mount but not too many out there for a 2008 400 .
  9. Kodiak/Big Bear/Bruin/Wolverine Discussion
    So I bought this kodiak and the rear diff bearings and seals are all shot. I got the rebuild kit and wheel bearing kit and went to work. I'm stumped on one seal. It's in the housing and there's a sleeve holding it in. Anybody dealt with this that can tell me how to get the sleeve out? There's...
  10. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey my kodiak will only start when I hit the 12v solenoid with a wire. Non of my lights work or my winch . I don't know whats wrong with it any help please. I have a brand new battery . My starter doesn't work . Seems like my battery died but it's has great power
  11. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Ok so wiring is my krypton. I have a 2000 Kodiak I bought about 3 weeks ago. Everythung worked great on it now the electric start stopped working. Pulls find but kids cant pull it over. Ive checked the ground strap(looks good) and good connections. New relay last night. Still nothing. When you...
  12. Grizzly Tech Tips
    Does anyone know the stator test ohms for a 2007 Grizzly 400? I don`t have access to a service repair manual. Thanks in advance
  13. Grizzly Tech Tips
    As some of you may know I now have 2 older bikes both are kodiac 400s one 2x4 2000 one 4x4 2003 Some of you may or had one of these can you recommend lifting or not wheel spacers or not ect how much winch tire combos ect
  14. General Discussion
    So the fun begins The 2000 2x4 I picked up runs but will not go forwarded or back before I start ripping things apart I thougth maybe someone has had this happen and can point me in the right direction I here some noise but no movement at all its an automatic but you put in gear not sure how...
  15. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, Been scouring your site for a while. Got a lot of good info to check, but ultimately still no luck. I have a 2000 Kodiak 400 4x4 I got as a parts bike. Using my 2003 for spares, I've put the bike together. The head and cylinder jug are from my 2003, otherwise engine is 2000 (in...
  16. Grizzly Tech Tips
    Looking for a little help guys. The radiator fan is not coming on on my 06 400 kodiak. I tried jumping the fan straight to the battery. I jumped it at the connector that is under the front rack. Is this the right place to jump it? It didn't come on. Assuming this is the correct place to jump the...
  17. New Member Introductions
    My 400 had been running great all through hunting season until the very end. It started dying at odd times and would restart after it sat for a little while. Now it's hard to get it to start and when it does I have to keep on the throttle to keep it going. It's had a carb rebuild and new gas...
  18. Kodiak/Big Bear/Bruin/Wolverine Discussion
    hello all, i have a 2001 yamaha kodiak 400 4x4 auto. i keep frying cdi boxes. i have blown 4 in two months. i have replaced the stator, internal pick up coil, external coil, regulator, stater selenoid all with oem part. almost 1200 worth of cdi boxes. when i replace the cdi box i can get about...
1-18 of 56 Results
Top