Grizzly Riders Forum banner
bad
1-20 of 35 Results
  1. Grizzly Talk
    Hi everyone, went out to fire up my 700 the other evening and this is what I get... http://www.emerickdesign.com/misc/start.mp4 Anyone have any suggestions as far as what it could be, bad starter? Battery seems to be fine, lights power on, dash works, I keep it on a tender if it ever sits too...
  2. Grizzly Engine & Transmission
    Ok I'm a yamaha lover I've had like 4 Grizzlies, 3 Big Bears, & a Kodiak! And none of them has done what this 1 is doing! Ok it's a 2005 Grizzly 660, has the 686 big bore kit, epi mudder clutch kit, jetted carb, hmf exhaust, & snorkeled with 2" pipe. It has ran fine tile a week ago when the...
  3. General Discussion
    Life got the best of me this year and to make a long story short my '11 Grizz 700 has a half tank of gas (w/ no stabilizer) and hasn't been started for around 9 or 10 months. I have apologized to it and promised this will never happen again, but in the meantime I'm faced with what to do to...
  4. General Discussion
    I have a 2004 660 grizzly and the rear tire has a wobble to it so I replaced the rear wheel bearing and it still has the wobble. I was wondering if the sleeve it slips into the axel is bad and how do I fix that?
  5. Grizzly Talk
    Hey everyone, first off I would like to say thanks for EVERYTHING! This is my first post, I've been joined up for a bit and fixed numerous little quarks and problems with my Grizz just by using the search button. You people are a wealth of knowledge and I appreciate that. However I couldnt find...
  6. Grizzly Engine & Transmission
    Hi I have a 2004 660 Grizzly I just purchased. When I start it up most times it will make a high pitch whining sound and then it starts. The pull start also sounds like it is grinding when I pull it over. Any help would be appreciated Thank you
  7. Grizzly Engine & Transmission
    Hello all, I just picked up my first Yamaha. An '02 Grizzly 660. Last night while running I turned the fuel petcock all the way to the left and it continued to run without issue. Even gave it a few revs and it still didn't sputter out. Leads me to believe the fuel cock isn't working. Does this...
  8. Pictures & Videos
    Edited Video of a group ride we did last weekend.
  9. Grizzly Talk
    WHEN I bought my new 700 grizz i also at the same time bought a set of the OEM hand guards. when I got home and went to install them i noticed 1 of the (side specific) metal straps that holds the alum. bracket to the handle bars was wrong. they had 2 of the same side in the box. its been well...
  10. Grizzly Talk
    Im having to rebuild my top end on my atv the timing chain was stretched and the piston was loose which wore out the sleeve Im getting it rebuilt I have a 686cc sleeve and piston rebuild I will be putting on it. It has brand new axles all around new front drive shaft axle new couplings for front...
  11. Grizzly Tire & Wheel Combos
    I just bought my 2006 660 Grizzly. It has 14" ITP wheels and Mudlite XTR tires. will this combo be very hard on my axles? I have one front with a tore boot and clicking sound already. Thanks! My friend has a take off set 4 wheels and 4 tires from his Grizzly with less than 10 miles on them that...
  12. Official Clutch Forum
    i have a 2012 grizzly 700 special editon. i have 20 miles on it taking my time breaking her in..but when i tap the gas i hear a banging or like a clunking sound its coming from by my right foot..which i belive is the clutch is this normal will it go away..
  13. Grizzly Electrical & Lighting
    He guys, Need some experienced help here. Ill try to keep it short because no one likes long posts but bear with me please. Questions please reply and I can tell more detail. Lets start at the beginning. It started out (a few days ago) that when I turned the key on and then turned on the red...
  14. Grizzly Chassis & Body
    Hello folks ive been having troubles finding a problem on my grizz. When riding from about 20 to 50 mph i get a really terrible grinding/ binding feeling under the seat. It felt like to me it was in the left rear axle area. Well i tore it apart and put a new wheel bearing in on that side because...
  15. Grizzly Talk
    Hey there guys, Like the title says I would like some experts to let me know of anything that is weak or anything that sould be replaced from stock. I want to put steel yamaha front and rear bumpers on her for additional protection. I also think I would like to put some under armor skid...
  16. Grizzly Electrical & Lighting
    Alright, I am on my last nerve with this draw.:pullinhair::pullinhair: My battery, fully charged, will not sit for more than a day before losing all charge. Its brand new, charged it fully and put it in. It only has a couple rides in on it and some snow plowing. Its always had a batterytender...
  17. Rage Customs
    well guys i like it says i may have some bad news. it seems GR is under new management/ownership and they want to charge an outrageous amount to remain a sponsor here. i was asked to be a sponsor here so i could provide you with discounts and group buys on your favorite products but with the...
  18. Grizzly Talk
    Holy Smokes, If this Rhino hits the Floors And is not Priced stupid I for sure will be looking hard at this one.. I think it would be cool with a 6 speed like the R1 has..But will more than likly have a CVT . This thing Will be Crazy Fast and Fun!:clap:Pic straight from the april Dirtwheels...
  19. Industry News
    Winter started Thanksgiving weekend in the Big Horn Mountains, the site for the Eighth Annual Read More at http://offroadhub.com...
  20. Pictures & Videos
    Caught this after my son and I finished up his homework...
1-20 of 35 Results
Top