Grizzly Riders Forum banner

belt

  1. Official Clutch Forum
    Going to be replacing my OEM belt, i know the OEM belt is the best. Have read some bad reviews about the daycos, but what about the gates belts? Significantly less than the $175 oem belt from dealer
  2. Grizzly Engine & Transmission
    hi guys does anyone know if a cvt belt from a 700 rhino and a 700 grizzly are the same belt,i have both bikes . I keep a milk create in my truck with all I need just in case,oil,anti freeze,air filter cvt belt ect. the belt goes with me on the trails,i just don't want to carry two belts if I...
  3. Official Clutch Forum
    New to the forum, I recently got my 04 660 grizzly running after the winter it was having electrical issues at the time which are now fixed, I snorkeled it in the meantime with dual 2" intake and 2" cvt snorkels, on the first test run after I got the bike running my old belt(which was cracked...
  4. Grizzly Engine & Transmission
    I fail to keep my grizzly running properly because I don't ride it enough (im sorry). A year ago I brought it home and cleaned the carb and got it running correctly. Then it sat for another year. The battery died, I brought it home this past weekend and decided to rebuild the carburetor, i...
  5. Official Clutch Forum
    My quad just started to act like it was out of gas with any kind of load on it(trailer, cargo, person etc..), until you reached faster speeds, runs fine in reverse and neutral. I heard a chirp from the CVT area a few time just prior to this. Anyways I was told it was most likely a bad belt in...
  6. Official Clutch Forum
    What should I do to stop my belt from smoking when in thick mud does it bad in 4WD.. and 2wd I have 29.5 outlaws. White secondary spring and not sure about weights should I go down to 14 or 16 Would that stop it?
  7. Grizzly Engine & Transmission
    looking to replace my 660 drive belt, what would you consider a good aftermarket belt? my grizzly doesn't have a lot of miles on it but the machine has been in the texas heat for 4 years and its showing signs of drying out, and its just about at the minimal width so I want to repalce so it...
  8. New Member Introductions
    I rode through water with my 660 and now it slips and wont go . Help ! How do i fix it ?
  9. Grizzly Talk
    I have a 600 grizzly and want to replace the belt. Ive looked around on how to do it and i see some ppl using a tool and some not. Ive read alot and it seems i need a special tool. If this is true, how much is it and were can i get it? Im also wondering what kind of belt i should use?
  10. Grizzly Tech Tips
    05 kodiak (same as 06 grizz 450)...water in belt case. whats the most likely culprit?
  11. Grizzly Talk
    I am having trouble with my Grizzly 660 and have a question hopefully someone can answer I bought some belt off ebay Gatorback I believe anyways the belt wont fit in the back wheel of the clutch setup so when i press the gas it is digging a mark into the back of the belt caseing, there is a...
  12. Official Clutch Forum
    I just installed 27" black diamond xtr tires on my 2011 700 grizz. i rode it around the yard and on some asphalt all all seems perfect. my buddy says because my tires are taller and heavier i need to do my clutch & INSTALL A H/D belt. could some of you fellas help me on this question ? I dont do...
  13. Grizzly Engine & Transmission
    i have a 2008 grizzly 700 i rode on sat and had chunks of belt coming out the cvt snorkel. i ordered a new belt and it will be here on fri. i just got done putting the motor back in the bike i had to do the reverse gear update. could i have assembled the cvt system wrong to cause my belt to...
  14. Grizzly Engine & Transmission
    so i smoked my belt while riding on sat. pieces of it started coming out the snorkel lol. i have ordered a oem vbelt. i noticed there is grease in there. i cleaned everything real good and am wondering what kind of grease i need to put back in there? i read somewheres that i shouldnt put...
  15. Grizzly Engine & Transmission
    This last week I went on an ATV trip. We went to the mountains of western Kentucky. T was Friday and it was raining buckets but We had our good rain fear so we weren't deterred. It was about 12pm(left out at 9am) and I had to stop on a hill climb and lock it into 4wd. The terrain was to...
  16. Pictures & Videos
    We had just had 3 days of storminess & the mountains got some good snow .... along with the storms we had lots of high winds. So my buddy and I decided to "Go Track'in" !! ... :wee_hee: At the elevation we had decided to ride (7200 ft), I was expecting 8 to maybe 12 inches of fresh snow ...
  17. Official Clutch Forum
    When would u recommend replacing the factory CVT belt? I have 1300 miles on mine. I had a problem with my rear brakes last year locking up and i had to drive through them for a little while to get to a safe spot for repair. Might have damaged the belt or prematurely aged it. I was looking at...
  18. Official Clutch Forum
    I know this has always been an issue when it comes time to do it. I got myself all jameed up in mud and water today and now my belt is slipping and i have no idea when it was replaced last, the bike is an 02. So I am changing to a new belt cause i have to take it apart and see whats up anyway...
  19. Grizzly Talk
    Well today i finally had to change my belt while doing routine maintenance..I am kinda disappointed that it didn't last longer than it did..lol just kidding... The belt has treated me very well ..Was down to 1.21 and some change in inches. My Grizz has over 11,000 miles on it with the...
  20. General Discussion
    I've got 1300 miles on my 08 and the belt is slipping a bit (whining at start). It's time for a new belt and I'm thinking Dayco from my snowmobile days but I've seen the Gator belts for nearly the same price. Any experience out their with either, good or bad?
Top