Grizzly Riders Forum banner
bolt
1-13 of 13 Results
  1. Grizzly Accessories
    So I took the motor off the winch with the 2 bolts that hold it on to look it over. When I went to put it back on, the bolts have nothing to screw back into, I tried to turn the winch to see if the alignment moved but not the case. Am I missing something, lol I feel like a dummy but can't figure...
  2. Grizzly Engine & Transmission
    I have a 2005 660. I was removing front rack, dropped a bolt down the snorkeled cvt intake. Can not find it anywhere, pulled the intake boot, tried fishing out with flex maganet . You think this is something I have to worry about? Being the bolt is somewhat big. I shouldn't be small enough to...
  3. Grizzly Engine & Transmission
    I'm looking at a site called "stevenscycle.com" that sells a bolt on kit,cylinder piston rings gaskets etc, 70cc increase. This is for my 2007 grizzly 450. Has anyone checked this out yet? It's made by Athena.
  4. General Discussion
    Long story short ... I'm installing a winch on a 4 wheeler and need to find a bolt just like this one except it needs to be 1/4" longer. Sorry the pics a little out of focus due to distance. It's a 5/16-18 3/4" bolt with a hex head that says E-G 10.9. I searched ebay using the best...
  5. Grizzly Talk
    Ok so....long story short the bolt holding a rear knuckle got bent and the threads damaged during removal. Unfort for me the replacement wont be in until next week, while this weekend I have big plans! Leads me to...what's the issue with getting one that's comparable from the bolt isle?
  6. Grizzly Tech Tips
    So I am now a member of the front diff stripped drain hole club; I was able to remove the copper washer to get the OEM plug tightened up, but I would like to replace it with a longer bolt so I could use the copper washer for properly sealing. I was wondering who has replaced it with a different...
  7. Grizzly Talk
    Sorry if this is already posted but after a search I could not find any info.. so anyways... After doing some reading (this forum is great) I discovered the clunking noise the odd time while cornering is (probably) coming from a loose lower castle nut on my left front lower A-arm. I removed the...
  8. Official Clutch Forum
    So of course I broke two of the clutch cover bolts when I opened it up to check everything out. Its one of the long ones and one short one. I still have to try to extract them, but wondering if I can grab some at the hardware store, or if I have to order them. I tried to look them up, but cant...
  9. Grizzly Tire & Wheel Combos
    will the brute force wheel bolt up to a grizzly 450? and r the grizzly 450 and grizzly 700 and 660 bolt patterns the same? thanks
  10. Grizzly Engine & Transmission
    Anybody do this? This is from the service manual but no mension of it in the owners maual... 13.Check:  Engine oil pressure ************************************************** ***  Slightly loosen the oil gallery bolt 1.  Start the engine and keep it idling until engine oil starts to...
  11. General Discussion
    I need a nut/bolt for a M33x1.5 RH thread pattern. Im working on fabricating something up and need just one or two now, but if it works out I will need to make a bulk order. I just sent out a few emails to some places that specialize in fasteners when i saw their sites did not show any thing in...
  12. Grizzly Engine & Transmission
    Anyone know where I can find the specs on a banjo bolt for the oil line on my 350? I got the part number off the yamaha web site but can't locate the actual specs of the bolt.
  13. Useless Info and BS
    broken arctic cat 650 v-twin - City of Toronto ATV For Sale - Kijiji City of Toronto Canada. I like the bolt on splinters, idiot award?
1-13 of 13 Results
Top