Grizzly Riders Forum banner
broken
1-12 of 13 Results
  1. Grizzly Tech Tips
    Hello all, I ride a 2000 Grizzly YFM600. I recently did a rear brake job and discovered a broken lug stud on my brake drum. most studs can be driven out and replaced, but mine has a 2" hard rubber spacer between my drum and rim. The studs are about 3" long with a metal sleeve over them to accept...
  2. Grizzly Engine & Transmission
    Went riding last weekend and got into a pretty deep rut and leaned way over to the left. It didn't trip the roll over valve and the machine kept running. I thought I may have ingested a bit of water but when I cracked open the air box it was dry inside. Shortly after this deep hole I...
  3. Grizzly Talk
    Hi everyone, This past weekend I think my son broke my rear axle on my 2004 Grizzly 660. One tire spins and the other does not anymore. If you grab the axle, it is wobble. How hard is it to change out axles on the 660? Anyone recommend a place to buy them from? I also thought since I was...
  4. Grizzly Chassis & Body
    Today i pulled my quad apart for some inspection. Well i found some breaks. I don't feel to bad about it since there is 12,000 hard miles on it. Here are a couple pictures of the breaks. In one of the photos you can see both sides that are broke. The rest of the frame looked good. Well...
  5. Grizzly Chassis & Body
    While riding this last weekend...gentle riding....lol I heard a snap-crackle-pop from the back of my 700 Grizz. I stopped, lifted the ass end onto a tree stump, and found that I had a broken knuckle on my right rear CV axle. So I managed to baby it back to my truck.... now in the garage I have...
  6. Grizzly Chassis & Body
    So first off, all the new parts are here and it's back together, so no worries there. What I want to know is if what the dealer told my friend is well warranted. Basically on the 04 Kodiak 450 SRA the rear swing arm broke in TWO places. It's easy to see the break, but you'd have to know what...
  7. Looking to Buy
    I'm looking for a 04 grizzly 660 rear end that has a good case on it to so I can fix mine
  8. Looking to Buy
    guys im in need of a broken rear end. i really need the case off of one to fix the hole in mine so if anyone is looking to get rid of one and have a little extra money in their pocket let me know please.
  9. Looking to Buy
    With access to all that is welding I am planning to fab my own bumpers but thought it would be nice to have the bolt pattern already in place to start from. So who has busted, bent, dented, used but not used up old bumpers collecting dust in the corner of your garage??? It is spring cleaning...
  10. Grizzly Engine & Transmission
    My right front shaft has sheared off right at the inside top knuckle joint. Any ideas on getting the short end out or do I have to replace the whole shaft and splines into the front diff? The knuckle joint and inside housing appear to be fine and I don't want to mess 'em up... Thanks
  11. General Discussion
    had the almost 40 staples removed today and more x-rays .. all is going well !! i ended up with 7 screws and a plate. doc did have to remove a piece of bone also that was to small to screw back on. 3 breaks total , just from slipping and falling in my own driveway. some might find it gross...
  12. General Discussion
    Before the game last night, me and a buddy went for a quick ride. I had my grizz, and he was riding a 800 cannedham max. Well, i guess i hit one snow back a bit too fast... That box on the back saved my ass! With all the thick heavy winter coveralls on, there was no way i could have tried to...
1-12 of 13 Results
Top