Grizzly Riders Forum banner
build
1-17 of 17 Results
  1. Useless Info and BS
    Well, you might have coated your house with vibrant colors to make it look genuine. Similarly, we can implement to build your guns. But when you do it for weapons, then it is sure to give you better results. It is done because the gun's material might corrode or peel off at times, leaving you...
  2. Grizzly Talk
    Soo does the 02 grizzly 660 have an oil overflow from somewhere when I first started riding the bike it smoked to all hell from the exhoust being painted no big deal but the side covers are still off and I noticed while riding my leg was getting oily looking down while riding it seemed to be...
  3. New Member Introductions
    Hello everyone, just joined the group today. I am 2003 Grizzly 660. In the near future I'm looking to do alittle work on my wheeler and I'm curious if anyone has done it before or has any advice. I don't wanna do to much to where it's going to be a high mantience machine. All I have done right...
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Just Picked up a 1989 bigbear 350 for 400$. Its mint... I am going to build it into a mud slaying machine. I do a lot of custom fab work. nothing leaves my shop. I am planning to make a custom arched a-arm 6" lift and widen it about 7" with some 30" silverbacks. Do the same with the rear...
  5. The Official "MUD" Section
    How's it going everyone I'm looking for people to give me some advice to make my 01 600 grizzly that much better in the mud so fair I have 2/1/2 " wheel spacers 2" lift 28" mud lights Iv built full snorkel kit and full custom air box on it I re did the wiring harness and dielectric greased all...
  6. Grizzly Engine & Transmission
    Has anyone built an engine with this kit by Hotrods? My parts should arrive here by the middle of the week. Any tips on the prep work or build itself? I am ready to get this project started and finished.:boxing:
  7. Grizzly Talk
    When are the new Griz models announced and available? Also, any quality issues since the move to assemble in US (not intended as a bash on US workers just questioned because it's a new factory)?
  8. Grizzly Talk
    Howdy guys, this very well may be my first post here ;) I'll introduce myself in the new member section asap. In the meantime, quick question... I'm picking up my 2012 Grizzly 700 tomorrow but concerned from the VIN they gave me over the phone it may be last Summers stock. S/N is 3005xx. Just...
  9. Grizzly Engine & Transmission
    grizzly 700 motor build help hey guys i am getting a 734 big bore kit and a +5mm stroker kit for my grizzly 700 i am not sure what cam to get with this and is there anything else that i may need. i wasnt sure if i needed a programmer or exhaust, if yall could help me out it would be greatly...
  10. Grizzly Engine & Transmission
    Well I bought another 660 with a blown motor for 1500! I have one now that I put a 686 kit in with mudbuster cam, head port, full exhaust, clutch kit, and jet kit and it runs damn good!!! It has more power than my buddys 700FI.....so on this build Im doing a +4mm stroker crank, ported head, full...
  11. Pictures & Videos
    So far I've put 30 inch Zilla's (skinny/wide), 14 ITP SS212's, a Cabela's backrest, custom warning label covers (from 2faroffroad), and built my own audio pipes. I also put on a exhaust tip, a white secondary spring, and a 1.5mm shim kit. Oh and lets don't forget the camo beer holder!!! I have...
  12. General Discussion
    Anyone watch the biker build off between Jesse, sr., jr. I think sr. got everything on except the mowing deck, ya it looked cool but no motorcycle. Plus sr had everyone but his crew basically build it, even had sumone build that frame. Jr bike was cool looking, the wheels were kinda overkill but...
  13. Grizzly Talk
    Well it was resanly my birthday so i got alot of atv stuff and so im going to be posting pics and updates as i put them on so i want you guys here at GR to say what you think about it. let me warn you it won't be as awsome as Butch's grizz but its still going to be realy awsome. Pics will be up...
  14. General Discussion
    So I have been looking at building a GNCC quad in the near future and I have a few questions. I want to make this grizzly somewhat unique. With the motor build. I would like to do a hot rod crank as well as a 727 BBK. Does anyone have any experience with the 727? Is it too big? Or would I be...
  15. The Great Outdoors
    I pretty much hold 10/22sniper responsible (after seeing his recent post) for re-igniting my urge to build a sweet 10/22 platform :boxing: I am planning this setup to be my ultimate small varmint/can killer! It's not quite done yet, but here are a couple pix of my progress - Tactical Solutions...
  16. Official Clutch Forum
    Hey GR members and guests, I recently had a thread about the 200 mile service cost where I was dealing with some valve noise. The noise is actually my stock clutch/sheave weights (per the Yamaha mechanic). I've done extensive reading on Jack's clutch threads about the clearance/sticking of the...
  17. Member's Rigs
    Ok so back in the summer we decided we needed a bigger trailer. The 5x14 just wasn't big enough anymore. So I picked up a old hay trailer for $300 it's 8x16 on the deck it had a wood deck but had all rotted off. First thing I did was ditch the mobile home axle replaced it with a drop 3500lb with...
1-17 of 17 Results
Top