Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 43 Results
  1. Kodiak/Big Bear/Bruin/Wolverine Discussion
    can anyone tell me if the middle driven shaft can be removed without splitting the engine cases , I believe the damper cam is rounded over and is jumping out of it's seat in the middle drive pinion gear , with the quad jacked up wheels off the ground in 4wd front brake applied the front gear...
  2. Grizzly Engine & Transmission
    Anyone have any thought on installing a mudbuster cam on a 2004 Yamaha Grizzly 660?
  3. Grizzly Engine & Transmission
    I have a 2009 Grizzly 450 I currently have a JBS Sheave, cam plate, greaseless weights, modded stock exhaust, jetted, and modded stock air box. I was looking into getting a hc 11:1 piston and a webcams cam. What kind of performance and reliability should I expect? What does the cam and piston...
  4. Official Clutch Forum
    Hey guys! I'm just wondering if anyone has pics of their cam plate modded? Also I've just read that the cam plate mod only has an effect in low range and not high, is this true?
  5. Custom Accessories
    The wife just got me a Sony Action Cam for my b-day and I'm looking at mounting it somewhere on the front of my 2011 Grizz 700. I was thinking of putting it on the fender but I think it would work better on the front rack or somewhere towards the front/inside of the quad. Anyone have ideas on...
  6. New Member Introductions
    i have a 2000 girzzly 600 its bored out .10 over but i put the stock cam back in it i did notice that the cam chain was wore a bit and the tensioner was out a little over half way out but i reluctantly put it all back in not thinking that this would be a issue such a short time down the road...
  7. Grizzly Engine & Transmission
    Here's the deal. I am building a stroker. All I need is a cam, valves, guides, and such. I can either put a stage 2 cam and have to go with aftermarket valves or put the mud buster in an use stock valves. Everything thing I have found for the stage2 is for a raptor 660, options? Ideas? Thoughts?
  8. New Member Introductions
    I am currently trying to rebuild my motor. The cam broke and absolutely destroyed the head. I already have the head and it is currently being ported and polished. Having some issues figuring out what cam and valves to use. I've read about installing the hot cam stage 2 but it's for a raptor. Can...
  9. Pictures & Videos
    The new and improved Contour+2 camera. Looks pretty good! This message is sponsored by the campaign for a 2up Grizzly!!!
    Go Pro HD Hero2 Motorsports Edition Camera GoPro cameras are used by more motorsports professionals, race teams and core enthusiasts than any other camera in the world. The HD HERO2: Motorsports Edition is the most advanced Go Pro helmet cam yet. Wearable and gear mountable, waterproof to 197'...
  11. Grizzly Engine & Transmission
    im getting ready to order parts to rebuild my 660. i do mostly trail riding and its usually aggressive and fast riding. im planing on a 686 bbk. can i run pump gas and 11:1 comp? Im thinking it should be ok with a cam in it. also what cam would be better, raptor hotcams stage 1 or 2? i...
  12. The Great Outdoors
    Well I recently purchased the Bushnell trophy Cam and I just wanted to tell you how much I am impressed with it so far. I put it out on 4 April. Yesterday I went it checked it.. I had 2,256 pictures on it !!! Now only 12 of them had deer in them and all the rest were ***** and opossums !!!! But...
  13. Grizzly Engine & Transmission
    Been putting this off as I wanted it to be warmer but being that mother nature is refusing to cooperate I packed up the grizz and headed to my work. My shop at work is about an hour a way so I don't do to many projects there. Here's some if the goodies Hopefully everything goes fine and...
  14. Official Clutch Forum
    Anyone know the part number for the sliders from for a 550/700 and are the 660 sliders the same as the 550/700?
  15. Grizzly Engine & Transmission
    I don't have any head work done. It's a 11:1 kit and I wanna change the cam. I have EHS lid/filter kit coming. PCv with auto tune. I am running stock size dirt commanders. I will be doing the mm#2,#3 cvt mods. Next year I plan on sending out the head and having valves and a P&P job. I simply...
  16. Pictures & Videos
    Check out Drift inovation's newest helmet cam..
  17. Pictures & Videos
    I don't have a picture to post, but one of my rider friends bought one of the Contour HD cams that have been on sale recently. Yesterday he installed it on his helmet and used it for the first time. All seemed to work flawlessly BUT, dust collected real quickly inside the clear rotating front...
  18. Parts For Sale
    Here is a 660 outer primary sheave and cam plate. It is in good shape. Make me an offer.
  19. Pictures & Videos
    Got this from a friend of mine today in an e-mail. Butch- Don't take up snowmobiling!!!:laugh1:
  20. Pictures & Videos
    Dash Cam: Canton PD "Notification" Arrest & Officer Goes Berserk / Threatens This is interesting. And something to think about if you have a CCW. This is an excerpt from an interview on a radio show featuring Canton City Council President Alan Schulman. Here is the same Police Officer...
1-20 of 43 Results