Grizzly Riders Forum banner
case
1-20 of 22 Results
  1. Grizzly Engine & Transmission
    I just got a grizzly 660 with a grenaded engine and have been looking at the aftermarket head and crankcase on ebay, does anyone have any experience with these?
  2. Grizzly Electrical & Lighting
    :chillin:I want to update my 07 700 grizzly stator cooling but can't see how the new oil line attaches to the case. What is different about the updated case .if anyone has pics to help with this update would be helpful Thanks mike
  3. ATVs For Sale
    2006 Grizzly 660 basket case. I am wanting to sell all together as a project not parting it out right now. It has a new Hot Cams crank in it and also a brand new edelbrock carb with it. I want $500 for it. Its not stolen, I had the VIN ran when I bought it. Located in Crestview, FL
  4. Grizzly Engine & Transmission
    I got a 2005 grizzly 660 The crank case keeps filling up with gas. I stripped it down today and noticed the fuel cock doesn't shut off. Also the engine is locked up? It was running just fine. shut it off and about 10 min. later I noticed gas pouring out of the air box? is it just a bad NEEDLE...
  5. Grizzly Engine & Transmission
    Replacing bearings in crank case due to dirty pond water. Pulled all bearings and all are open type except one yamaha part# 93306-20464-00 which goes on the end of the axle drive shaft. This bearing has a rubber seal that is in the blind side of the crankcase. Has anyone else seen this and why...
  6. Grizzly Tech Tips
    I made another video on how to change the servo motors in the older model Yamahas 98-01 with the sealed servo assemblies. Its easy to do and will take you about 10-15 min with basic tools.
  7. Grizzly Chassis & Body
    Hey everyone, Just a quick question. I have an 06 660 grizzly and my right front axle actually sheared just inside the case. if i pull off the other side can I punch it out or would i have to split the case? metal to hard to drill I'm sure, but I think I'nm going to end up splitting the case...
  8. Grizzly Tech Tips
    05 kodiak (same as 06 grizz 450)...water in belt case. whats the most likely culprit?
  9. Parts For Sale
    I have a real nice, High Quality Neoprene case wit ha clasp type lock / closure that is ideal for a cell phone, camera/ cam corder, GPS, ect. $10.00 + $5.00 UPS (Cont US Only)
  10. Grizzly Engine & Transmission
    I bought another wheeler today sort of. I paid for the rims and tires and they through the bike in. Its a 04, 4000 miles. 567 hrs It became stuck in a swamp, froze in overnight. To free it they hooked a dozer winch on to it and ripped the front bumper, rack, grill. lower ball joint all off...
  11. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hi all. I need some advice.I just aquired an 89 big bear 4x4.The fill plug area has apparently been cracked or broken and JB welded back.Of course now it leaks a lot.I am a pretty decent TIG welder .My plan is to remove the case and weld it back up.Good or Bad idea? The damage is to the fill...
  12. Pictures & Videos
    This how-to gives step-by-step instructions for adding an adapter to your Contour HD Waterproof case so you can use standard screw-in camera filters such as UV and polarizing filters. PLEASE READ THIS ENTIRE WRITE-UP BEFORE BYING ANY PARTS FOR THIS PROJECT! PART I Although the Contour HD...
  13. Grizzly Engine & Transmission
    fellow riders, I need your help. I recently lost reverse and I know why, but i have to split the case. I have never done this and I figure I will take the walk of shame and ask questions that are newbish... I am attaching 2 pictures of how the engine site on the bench. I have removed all the...
  14. Grizzly Accessories
    I just ordered a tamarack front box the end of May and between them pushing back my delivery date(3rd time now), the quality issues I am hearing lately and the whole Grizzly of the month issue they messed up I am going to cancel my order with them. Does any one have any recomendations for...
  15. Grizzly Engine & Transmission
    It looks like i am splitting my case... I was riding yesterday and got to an area that was never a problem for me before. I went in and my grizzly immediately sunk to the floorboards... I was stuck going forward. I put it in reverse and i was able to back up a foot then i heard a 'pop' and i...
  16. Grizzly Accessories
    Has anyone put 2 Rotopax storage packs side by side? Or know of a reason why this wouldnt work? Thought it might be a good option when the fuel isnt needed but extra storage is.
  17. XtremeVu
    GR Members, I have one contour GPS 1080 model that was purchased initially to mock up and prototype the GPS version of our CamClamp. It has seen no outdoor use and comes with a full warranty. I am putting up for sale with a Black CamClamp mount full combo kit and foam case. Here is what is...
  18. Looking to Buy
    I need an 04 to 07 Grizzly 4x4*center engine case. I'm located in Georgia and willing to drive*or pay shipping. If the price and product is good that is. * I bought my 05 Grizzly on a friday and dropped the rod the next day......Yea it SUCKS!!!!!! But thats what happens when you test the...
  19. General Classifieds
    I have a nice (nearly new - used 1 day) neoprene case for storing / transporting the Drift X-170 video camera or a CX series GPS unit, or whatever. Case will streach (as neoprene does) but without any streach will hold an object approx. 3" x 2" x 6" and is water resistend and shock resistant...
  20. Pictures & Videos
    It seems like everyone and his dog is selling the WP case for the Vholdr ContourHD for $39.99 but I ran across this place that has it on sale for $10 bucks cheaper than just about anyone else at $29.89. VholdR Waterproof Case for ContourHD ContourHD1080p. 3300. VholdR Digital Camera...
1-20 of 22 Results
Top