Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, looking for some advice from the electrical experts out there. I have a 2004 Kodiak 450 auto, that died while plowing snow last winter. No spark condition. I took the easy way out and replaced the coil and cdi box. I know the coil is good, and with a new cdi box it fired right up and...
  2. Looking to Buy
    Anybody in the western PA, eastern OH area have a known good CDI available? I'm looking to go down to HMT on Wednesday and would like to take the Grizz. If you in the area and have a CDI, shoot me an email at mabdcmbATgmailDOTcom. Mike Sent from my SM-G900V using Tapatalk
  3. Grizzly Electrical & Lighting
    im almost positive mine is bad at this point, replaced stator rectifier coil and checked every wire to try and regain spark. now i dont know why they are so rediciously priced on ebay, but i did find some cheaper ones for i think it was a 350 warrior for like 40.00 and the plugs are the same...
  4. Looking to Buy
    I'm in need of a ignition cdi please pm me a price! Thanks
  5. Grizzly Engine & Transmission
    Sorry - if I"m in the wrong topic, let me know! _________________________________________ I woke the Griz up from winter slumber and the 5 yr old battery was dead. Not unexpected! A new battery and I fired it up. It wasn't easy, but it never is with this one, especially when it's cold. I got...
  6. Grizzly Electrical & Lighting
    does anyone know if they make an aftermarket cdi for the 2014 450.i found the amr stage 3 for the 08s i believe but nothing for the 14.are they the same.thanks
  7. Kodiak/Big Bear/Bruin/Wolverine Discussion
    hello all, i have a 2001 yamaha kodiak 400 4x4 auto. i keep frying cdi boxes. i have blown 4 in two months. i have replaced the stator, internal pick up coil, external coil, regulator, stater selenoid all with oem part. almost 1200 worth of cdi boxes. when i replace the cdi box i can get about...
  8. Grizzly Electrical & Lighting
    What years CDI will work on my 2002 Grizzly 660?
    cdi
  9. Grizzly Electrical & Lighting
    I'm looking for a new CDI for my 05 660 Grizzly and not sure which one to get. Figure if I'm replacing it anyhow might as well consider an upgrade. Main thing I suppose would be to get rid of the rev limiters other than that I'm open to opinions. My machine is mainly stock with 26" Mudlites...
  10. General Discussion
    Ok I've got a 2001 kodiak 400 4x4 the cdi has a hole burnt threw it sometimes it would runn others it wouldn't start I'm trying to figure out what type of cdi's I could replace it with wolverine big bear? Anything at all and also where I could get a real cheap used one or something the price for...
  11. New Member Introductions
    Ok I've got a 2001 kodiak 400 4x4 the cdi has a hole burnt threw it sometimes it would runn others it wouldn't start I'm trying to figure out what type of cdi's I could replace it with wolverine big bear? Anything at all and also where I could get a real cheap used one or something the price for...
  12. Grizzly Electrical & Lighting
    He guys, Need some experienced help here. Ill try to keep it short because no one likes long posts but bear with me please. Questions please reply and I can tell more detail. Lets start at the beginning. It started out (a few days ago) that when I turned the key on and then turned on the red...
  13. Parts For Sale
    I have a Dynatec CDI and a Power tip both come off of a 07 660 Rhino if anyone is interested 115.00 for the CDI and 10.00 for the power tip. I am located in SW PA. can ship via UPS or USPS, buyer resposible for Shipping. PM me or email me at [email protected]!
  14. Grizzly Electrical & Lighting
    Im debating on a AMR stage 3 cdi and monster coil for my 450. Is there any real noticeable power gains from them. I know it will raise my rev limiter and ive already done the reverse overide, im just wondering about seat of the pants power gains?
  15. Grizzly Electrical & Lighting
    So my Dad tells me that he thinks he has screwed up his 08 Grizz 700 bad, I guess the battery went dead and he stuck a jump pack on it and strange things happened then absolutely nothing happened, he tried charging the battery and his charger said the battery had a bad cell. We replaced the...
  16. Kodiak/Big Bear/Bruin/Wolverine Discussion
    so i bought this Kodiak 4x4 that supposedly needs a cdi. it turns over but wont fire. ive never heard it run. i plan to rip off the racks, plastic, etc all the way down to the frame. then check/clean every connection and wire, starter, stator coil, rectifier, relay, etc for continuity n...
  17. Parts For Sale
    CDI..................................$50 GUAGE DISPLAY................$80 located in pineville, Louisiana and any questions send me a PM also have other missilanious parts like break disk, and a-arm or two' clutch cover' just ask and i might have what you need, ''have no motor parts or diff"
  18. Grizzly Electrical & Lighting
    05 Kodiak 450 Installed replacement winch... Already had all the wires and relays and rocker switch from last winch... Went to shed to get wheeler out this morning and winch was sucked up passed the "rubber saver" and bent my fair lead bracket.. Winch will not work now.. Winch was installed over...
  19. Parts For Sale
    I have a black front bumper thats in pretty good shap just sitting aroun and a cdi box also i want to get rid of 50$ each im located in Pineville, LA any questions just leave me a comment.
  20. Grizzly Electrical & Lighting
    I instailled the heated grips direct to the battery in insteed of the aux power dumm a$$ will this damage the cdi what I did was instailled the heated grips wired it to the battery and then plowed the drive way worked great finished the dirveway put the bike in the grage came back tryed to...
1-20 of 31 Results
Top