Search Results for ‘coolant’

Hi, Bought a 2007 450 earlier this year with a blown head gasket (overheating with white smoke and water in oil). I replaced head gasket (checked head with feeler gauges as per manual and all was fine) and bike is running perfect with no smoke but still have issues with overheating. Temp light...

Hi all, This is my first post so be gentle and thanks in advance of any help you could provide.. :) I have a 2002 Yamaha Grizzly 660. It has been running pretty well until a few days ago the overheating light came on . So, I checked the coolant and really none in it. It could not have...

My '11 Crown vic with 270k miles suddenly started running rough mostly at the lower end of the gears. By the time you got into o/d the whole car shook. Scan tool gives me P0307 cyl 7 misfire, and P0316 misfire upon startup. So I pull the coil on 7 to find a pool of burnt smelling coolant...

Hey i got 2016 Yamaha grizzly 700 se. Recently the coolant light came on and when i got home i realized my rad was pretty plugged and figured it had actually got to hot and spit some of the coolant out as i had to fill my coolant jug up it was empty. All was good took on a ride or 2 had no more...

2011 Grizz 700 here and so far the only thing I've been told about replacing my coolant is that I should put the same color stuff back in that came out. But other than that nothing specific. A search through both the service or owner's manual gave no coolant info other than capacity...

Doing the first big maintenance on the old 2011 700 Grizz and have a couple q's. I've been told that Hondas take only a certain type of coolant and now I'm wondering about my Yamaha. Is there a certain type of coolant I need to look for or will general coolants be good enough? And...

I have a 08 grizzly 700fi 29.5 outlaws Radiator relocate Snorkel Bike is running hot an letting coolant an oil mix. I have replaced thermostat, housing an gasket an water pump an gaskets. I went riding probably a 6 hour trip. The hot light never came on but when I got it home I went to change...

Hey guys, as you can see I'm new to the group and I have a question..first, just to go back, I recently bought a 2008 grizzly 700. It had 1400 miles on it, excellent condition. The other day I finally got to hiy the trails again. Before I did, I did my usual pre-ride inspection, which to me up...

I just bought a 2011 450 with about 460 miles. After about 20 minutes of riding, the coolant temp light kicked on for a few seconds and then went off. This happened several more times on the ride home. I checked the reservoir and radiator levels before the ride and then after it cooled off and...

Has anyone tried using this product? if so, please let me kow what you think.

any one do one yet my buddys raptor has a cool inline temp gauge and his fan to a switch.. temp sensor works on my griz but it seems very hot when it comes on. im thinking of running a small autometer gauge to my front rack or handle bar ... just wondering if any one has done either

Ok so after our ride at Caw on the 30th and dealing with the heat issues. I have been doing alot of reading on the different additives and such for the coolant. Currently I'm running water wetter in the twins. Been reading up on engine ice and my question is if it's a propylene glycol and water...

Bought a used 2009 450 grizz and i was checking the overflow and their was no coolant. So my question is what type of coolant should i use ? Is preston 50/50 okay to use. Thanks for the help!!

help plz ive got coolant comming out of my overflow at higher rpm like its overheating replaced thermostat didnt help a bit radiator is clean and free of debrea thinkin maybe its the water pump is there a way to check and see if its workin and if thats the problem can i rebuild it or just buy a...

Hey guys I could use some advice. I have a 2010 grizzly 700 with a Trinity 780 BBK that was installed by a local dealer. The radiator is building alot of pressure and was shooting the overflow cap off just at idle. Took it back and they cleaned the vent line running to the overflow jug. It was...

I have seen guys asking questions about this kinda stuff before, so someone will get use out of this kinda info. Changing your cooling system coolant. Tools and items: Basic sockets, a long extension, a screwdriver, channel lock/water pump pliers, big bottomed drain pan, Coolant Time: 1-2...