Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 88 Results
  1. New Member Introductions
    So heard it’s a common problem for the grizzlys to brake the rear diff mounts and have heard rumors of an aftermarket brace/support that a person can buy to replace those mounts.. question is does anyone have a link or clue if they will ship to Canada or does anyone have pics for ideas to build...
  2. General Discussion
    I have a '11 Crown Vic with 300k miles on it and my rear diff fluid looks like this... Been watching some utube vids on how to change this fluid out but after a visit to the local Advance store I've got some questions. Up til now, forums on the net have led me to believe that all former...
  3. Grizzly Specifications
    I have a 2014 grizzly 700 when turning at low speeds or braking at low speeds I get a clicking noise from the rear diff and it’s not the cv axles because I have tried new ones when it’s on the jack in the air it doesn’t happen but as soon as I Apply the brakes it clicks. Diff oil was also clean...
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    After someone crashed my 2000 Yamaha kodiak 400 altramatic into a tree (front tire hit and bent rim, wheel bearings destroyed but frame took no damage) my front drive shaft began moving in and out while turning the back wheels forward but not in reverse. Does anyone know why this is happening?
  5. Pictures & Videos
    I have a 2011 grizz 700 and I noticed the c.v was sliding out of the diff. I just grabbed it and pushed it back in and when I tug it won't back out and I've rode it and put some what of a bind on it and it still hasn't came out. I recently took of the 26in stock tires and put 27x11-14 mega...
  6. Grizzly Chassis & Body
    Hi guys, Overhauling the rear diff on my 03 Griz and I'm having trouble beating the pinion bearing out of the housing. I'm using an "All Balls" kit from Royal. I beat the hell out of the pinion and it came out, but I'm having an issue with the bearing. I assume the gear on the diff side of...
  7. Grizzly Electrical & Lighting
    2006 660. Can I connect the splice wire from the green/white wire (reverse rev override) to the green diff override button and have it control both? So I can push the button to control either or both by way of a switch.
  8. Grizzly Engine & Transmission
    Hi, recently brought a used 2009 Grizzly 350. During oil change, I had up on a jack to check over. The front right tire was harder to turn than the left, which was easy. So I took hub Assm. Off checked the wheel bearing, not those. Very good shape. Removed the axle, and that bearing right behind...
  9. Grizzly Electrical & Lighting
    Hey guys, I have an 03 660 and the diff light just blinks, whether running or not. as soon as I press the diff button, it starts blinking and the servo doesn't do anything and the relay doesn't click. I removed the white relay and tried another one and still nothing. I tested the voltage going...
  10. General Discussion
    Have a 2011 Grizz 700 and for the diff oil the manual calls for SAE 80 API GL-4 hypoid gear oil. I'll be using Mobil 1 synthetic but as it comes in two different weights I'm not sure which one to get....either the 75W-90 or the 75W-140. The 75W-90 is listed as GL-5 and is recommended for use...
  11. Kodiak/Big Bear/Bruin/Wolverine Discussion
    So I bought this kodiak and the rear diff bearings and seals are all shot. I got the rebuild kit and wheel bearing kit and went to work. I'm stumped on one seal. It's in the housing and there's a sleeve holding it in. Anybody dealt with this that can tell me how to get the sleeve out? There's...
  12. General Discussion
    How do you get the drive shaft boss( number 7) off of the shaft (number 5)? Is it pressed on? It is a rear diff off a 660 grizzly and the driveshaft has stripped off the teeth inside the boss and its slipping
  13. Home Page Features
    Hi after just 100 miles on my 2009 (it sits at a remote location and sees little use) 450 the rear diff case has failed catastrophically. The drive shaft separated and took that part of the diff case with it. After getting the bike back 'on grid' I was in the process of removing the diff when I...
  14. New Member Introductions
    Okay guys, I'll keep reading and reading bit I can't figure out what'd is for the 2004 660 grizzly to turn off the Rev limiter for diff lock and reverse. Can someone please tell me? My button doesn't work at all so I've got to do the mod. Sorry if it's been posted before but I can't find out...
  15. Grizzly Talk
    I'm stuck , have a 2014 grizzly , wondering what oils I should run in the rear diff and the front diff. Is just a standed 80w-90 ok ?
  16. Grizzly Engine & Transmission
    Sorry for my english i speak french usualy, i got a grizzly 660 for 1 week ago, and while i ride it and i touch the brake in a trail with a big slope the rear wheel stop turning ( at this point its ok) but they bounce with a big knock knock knock knock.... so i check the rear diff and when i...
  17. 2012 Grizzly of the Month Winners
    i was playing around in a creek last week with a few of my buddies and my front wheels quit pulling when i was trying to come up the bank, i don't know really know whats going on. If you lift the four wheeler up and put it in 4x4 just the back tires spin but when you put it in diff-lock its like...
  18. Grizzly Tech Tips
    Well, I've searched around on different forums, and somehow I haven't found anyone else who has had this problem. Recently, my '06 660 Grizzly has started sputtering, missing, and throwing on the Diff Lock LED sporadically once I get it over 20mph. I've changed the oil in both differentials...
  19. Grizzly Tech Tips
    I'm rebuilding the rear end of my 05 Grizz 660. I'm having a problem removing the pinion gear. I can't get the nut loose. Any help and/or hints would be appreciated! Thanks!
1-20 of 88 Results
Top