Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 16 Results
  1. Grizzly Engine & Transmission
    2002 Grizzly 660. Water in oil. Drained it all, very nasty - almost like tan paint. Flushed it a few times.... still nasty Never been in any water over 6" so it was not from sinking it or running in water too deep. I started looking at everything on the cooling system since it was apparent the...
  2. Grizzly Electrical & Lighting
    Hello Everyone, 2004 660 grizzly I have an electrical issue that I need assistance with. I have a battery discharge problem. This machine was recently purchased, and the previous owner informed me to keep the battery unhooked when not in use, due to a battery drain when sitting. I left the...
  3. Grizzly Talk
    Is it worth it to spend $57 on 3 magnetic Gold Plugs, one for my engine oil and two for my diffs? Do people really find metal filings on these things? Thanks
  4. Grizzly Engine & Transmission
    So i made the biggest newbie mistake!! Overtightened my oil drain plug. I am also 95 percent sure i got all of the stripped threads also. What are my options fellow riders? Helicoil? Bigger plug? Help! 08 700
  5. Grizzly Engine & Transmission
    Hey guys, went for a ride yesterday, it was pretty dusty, so today i'd figure I would clean the air filter. All went well, but before I put all the plastic back on her I wanted to pull that plug from the air box drain line to let anything drain. But wouldn't you know it, I dropped it down in the...
  6. Grizzly Tech Tips
    any one else have extreme difficulty in removing the oil drain plug on a 2012, 700 is particular. went to do my 1st 20hr oil change and could not easily get the oil drain plug out. had to use a breaker bar to get it loose. it unthreaded ok, but only to find most of the threads were cut broke...
  7. Grizzly Tech Tips
    So I am now a member of the front diff stripped drain hole club; I was able to remove the copper washer to get the OEM plug tightened up, but I would like to replace it with a longer bolt so I could use the copper washer for properly sealing. I was wondering who has replaced it with a different...
  8. General Discussion
    Just wondering if anyone has installed a magnetic drain plug in there Grizzly? I stripped my front diff drain plug, and I'm looking for a longer drain plug with a few more threads on it to take advantage of the extra threads in the front diff. I've been looking into these magnetic drain plugs...
  9. Grizzly Tech Tips
    Where is the oil drain plug located on my 09 700 grizzly and what tool is required to remove it, thx
  10. Grizzly Chassis & Body
    After recently swamping my bike on the Hatfield/McCoy ride earlier this month; and having a Storage Box & Air Box full of silt & water - I decided to improve upon the OEM drains to make it easier & faster to get water and mud out of the above mentioned areas. This can work anywhere you get...
  11. Grizzly Engine & Transmission
    I noticed filter is on top of motor but can some plz tell me the location (left or right) of the oil drain plug.. I am still trying to get the leaves pulled out of the way and cant see Thanks
  12. Grizzly Engine & Transmission
    New here and maybe this is not the right place, but here goes. I am changing the oil in my '08 350 IRS and the drain plug is unexpectedly long. Is this the correct plug? Seems to match the manual, but was not ready for a 1"+ bolt.
  13. General Discussion
    Does anyone have any input about the pros or cons of using one in an atv?
  14. Grizzly Engine & Transmission
    I changed all my fluids last weekend and when tightening my front diff drain plug I felt an "uh oh" and stopped and took it out to find a ring of thread stuck to the plug. This machine has 7500 kms on it so I'm sure that plug had been in and out a few hundred times. I removed the crush washer...
  15. Grizzly Talk
    OK, I know how to operate a torque wrench.... may not be able to correctly spell it but anyway, come on..... Changed the Final Gear and Diff Oil..... Book said the Fill bolt torqued to 23 Nm on both final gear and diff. Diff Drain bolt torqued to 10 Nm . Ended up stripping the allen head...
1-15 of 16 Results