Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 78 Results
  1. Rhino Discussion
    I found a 660 engine from a Yamaha MC Skorpion motorcycle for sale. Will it fit and work in my Rhino since the motorcycle doesn't have a reverse or 4x4?
  2. Grizzly Talk
    Hello Everyone, I just bought a 2011 Grizzly 550 EPS and I'm trying to get it registered here in California from an Idaho title. I have the VIN# BUT the DMV also needs the engine#. Where is the ENGINE# located? Hopefully someone out there can help me out. BTW - it used to have a snow plow so...
  3. Grizzly Engine & Transmission
    Hello all. I just got a 99 Grizzly from my Dad. He had the engine rebuilt about 5 years ago. When he picked it up he was told it needed a new Carburetor. He never put one on it just let it set. I installed a new carb. Changed the oil. Checked valve clearance within limits. Checked timing good...
  4. New Member Introductions
    I had a engine rod go out on my 2008 Yamaha grizzly 700. What should I do now?
  5. Grizzly Talk
    I have a 2003 Kodiak 400 that I’m thinking of handing down to my son. I’ve been eyeing a new Grizzly, and I just need a push, Anyway, last weekend, I let my son ride the 400 to see if he was interested, while I suffered on an old Suzuki LT125. Still recovering. He stopped along the trail a...
  6. General Discussion
    This may sound like a stupid question, as I'm prone to ask sometimes. But...I drive a '96 Cherokee with the inline 4.0 non-interference engine and it doesn't like driving in the heat so much. Since I'm a car down right now I'm driving it a LOT more than I used to. After a lot of driving...
  7. Grizzly Engine & Transmission
    Hey guys, I got a 2007 Yamaha grizzly 700cc around February. I notice when I engine break “let go of the gas” the reverse R pops on on the gauge and won’t let me accelerate until it’s slow enough for the R to go away and let’s me accelerate again. The people at Alaska fun center can’t even...
  8. Kodiak/Big Bear/Bruin/Wolverine Discussion
    My buddies kodiak 450 started making this noise, any ideas? Sounds like a bearing. Thanks Sent from my SM-G950U using Tapatalk
  9. General Discussion
    I bought a 2011 Crown Vic with 300k miles 12 mos ago and I'm wondering how to approach servicing the timing belt. I know very little of it's past maintenance records other than what I've done with it this past year. Basically I'm wondering if I should go ahead and attempt to replace it...
  10. Grizzly Engine & Transmission
    Can I safely use Castrol Power 1 in my 99 Grizzly? Jao ma-2, apl sl) ALSO ANY RECOMMENDATIONS ON AFTERMARKET OIL FILTER NUMBERS?? I just want to do this right.
  11. General Discussion
    '11 Grizz 700 here. Since I've got some warm weather these next couple days I've decided to start the bike after about a year of just sitting. Took out the plug and sprayed a good amount of fogging oil on top of the piston to help lubricate things. After about a minute of letting it soak...
  12. Grizzly Electrical & Lighting
    Some history here as it may help, I ran my 2007 grizzly 700 low on coolant and took out the head gasket, I found another engine from another 700 grizzly with the 770 big bore kit( less the 400km on the build) I did a swap over with mine, fired it up and the EPS light is on and the engine light...
  13. Grizzly Talk
    My Yamaha grizzly 550 2009 model has gas going not the crankcase, what causes this? Thought maybe float was sticking but it's F.I.
  14. Grizzly Engine & Transmission
    Greetings, Just bought a Grizzly 700 (with 815 stroker kit installed). There is an engine knock that i can't identify. I pulled the clutch and started it and it is still there. It's staring to look like it might be a rod knock. I wanted to get a second or third opinion before I started...
  15. Grizzly Electrical & Lighting
    I just bought a 09 700 Grizzly, and the tail?brake light didn't work. I pulled the storage box out, and all the wires were unplugged, I matched up colors and got the brake, and tail light working. Then I discovered my engine fan is not coming on, there are still two wires by the taillight...
  16. Grizzly Engine & Transmission
    the vent tube below the oil stick is leaking oil help
  17. Grizzly Engine & Transmission
    I picked up a 2002 660 Grizzly from a guy. Friend of a friend. Anyway he said about 2 yearsago it developed a tick. So he tore it down and didnt find anything. Since he was in there he replaced the piston and rings. he said that he started it back up and the ticking was still there. So he...
  18. Grizzly Engine & Transmission
    Yamaha grizzly 600 4WV-15327-00-00 SPACER, ENGINE MOUNT location ??? Hi I need some help, I bought a grizzly 600 2001 year. The motor was off the frame and I rebuilt it, I have been working on atv,etc, for years. I have the manual on disc , the part shows up on the cranck case fische, the...
  19. Grizzly Engine & Transmission
    My '03 660 makes a fair amount of engine noise at idle. Sounds like valvetrain clatter to me but don't know for sure. Valves were done at a shop somewhat recently and he said they are in spec and the 660 motor just tends to be noisy. When you give it even slight throttle input it smooths out and...
  20. Industry News
    Off-Road Hub ---> Your Off-Road Information Engine
1-20 of 78 Results