Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 55 Results
  1. Grizzly Engine & Transmission
    I've been working on a friend's '98 Grizzly 660 and now I can't get the idle to go down. Put a few good turns on the idle adjustment knob and the idle is still to high. I know its not a carburetor issue because I cleaned and rebuilt it. I honestly just want to get this thing working so I can...
  2. New Member Introductions
    Just did the timing chain and after getting it back together I went to start it and it won't fire it spits gas and exhaust fumes out the intake. And seems like it should have more compression it had around 215 when I checked it before I tore it apart I can't remember the exact number but I know...
  3. New Member Introductions
    2002 grizz 660 11.1 high comp hotcams stage 2 raptor springs k&n clamp on snorkels ra Hey guys the wheeler sat for a couple years got it home cleaned the carb changed the oil ran great for about 3 miles easy riding. Started to act like it was running out of fuel then a couple little back fires...
  4. Home Page Features
    Read more about the Top 10 Products from 2016 High Lifter Mud Nationals at ATV.com.
  5. ATVs For Sale
    !!! Interested buyer should mail us direct for inquiry !!! Email: john.anders@outlook.com OR john.anders669@gmail.com Skype: john.anders01 2015 Polaris RZR 1000 EPS Desert Edition 2015 Polaris RZR xp 1000 EPS Highlifter 2014 Polaris RZR xp 1000 EPS 4x4 Side By Side 2014 Polaris 850 XP Sportsman...
  6. Grizzly Electrical & Lighting
    Hey everyone, I wanted to add a high beam indicator light to my 2013 Grizzly 700. Can anyone provide me the schematics? Thanks
  7. Grizzly Talk
    I have a 2014 Grizzly 450. It was submerged recently but the engine never ran while it was under water. I removed and thoroughly cleaned the fuel tank, air intake, carb, and fuel lines. I visually inspected the clutch and belt, both appear to be ok. I drained the oil twice, no signs of...
  8. Grizzly Tech Tips
    So, I have an 03 grizzly 660, just replaced the boot between the carb and motor, a "carb kit" and the diaphragm in the top of the carburetor. I finally got the bike put back together enough to start it, and when I do, it idles up super high, like the throttle is stuck, if I put my hand over...
  9. New Member Introductions
    When I shift the transmission through R-N-HR-LR (reverse, neutral, high range, low range), HR is "missing." I have disconnected the linkage and moved lever directly...same. LR is selected in either of the HR or LR positions. Will I need to split the cases on this good engine to see if...
  10. New Member Introductions
    Hi High Jingo, welcome to the forum! Why not make this your first post and introduce yourself to us?
  11. Grizzly Electrical & Lighting
    I have a 06 660 Grizzly that runs and starts well. While doing yearly servicing I put a voltmeter on my battery during idle. It consistently reads 17-17.5 volts. When I turn the quad off, let the batter sit for 5' and check the voltage of the battery it is 12.8-13.0. The battery is at least...
  12. General Discussion
    I own a 2013 grizzly 700 has 185miles on it... Did my first oil change Friday used yamalube 10-40 and new filter they sold me a crushed washer as well. That I forgot to install.. Took the fourwheeler out Saturday and right away it felt like the clutch wasn't engaging properly or something along...
  13. Grizzly Talk
    hi guys, i've got an 08 700fi grizzly i've owned since new and in the last couple of months whilst riding the engine seems to be missing momentarilly and the reverse light flicks up when this happens. i use the bike for hunting so 95%of its life is spent around the 20km/h mark, the...
  14. Grizzly Talk
    Hey guys, Ok, I have a 01 grizzly 600 ive been rebuilding, got it back from having engine rebuilt. Went to test ride and I have no high gear. Checked all other possible causes and all I and my mechanic can come up with is something happened to the fork inside the cases. Low & rev work, would...
  15. Industry News
    SHREVEPORT, LA - September 12, 2013 -*High Lifter Products Inc., organizers of the largest mud racing competition in the nation, the High Lifter ATV Mud Nationals, announced today the dates for the 2014 High Lifter Quadna Mud Nationals. Starting May 23 and running through May 25, High Lifter's...
  16. Grizzly Electrical & Lighting
    Hello all, I just purchase an '02 Grizzly 660 and the high temp light is on all the time. Even bone cold. The previous owner said it was a sensor and has just been riding it without issue. He said it used to flash and then just stayed on. I've read that it is more than likely a break in the wore...
  17. New Member Introductions
    Hi High Country, welcome to the forum! Why not make this your first post and introduce yourself to us?
  18. Industry News
    SHREVEPORT, LA - January, 2013 The 11th annual High Lifter ATV Mud Nationals is set to kick off March 20-24 at Mud Creek Off-Road Park in Jacksonville, Texas. This year marks the 9th year the event has been at Mud Creek, drawing thousands of off-road enthusiasts from the United States, Canada...
  19. Grizzly Engine & Transmission
    hey guys would like some input on what to do for my grizzly 700 2012..what can i do to improve low end and top end.its all stock nothing done to the grizzly...YET!!
  20. Industry News
    SHREVEPORT, LA - August, 2012*High Lifter Products Inc., the leader in custom aftermarket ATV accessories and products, today announced the release of its all-new Pro Series Max Clearance Trailing Arms Trailing Arm Kit for Polaris RZR XP 900 models. High Lifter's research and development team...
1-20 of 55 Results
Top