Grizzly Riders Forum banner

installed

  1. Grizzly Tech Tips
    Hello, I have searched the forums but could not find anything that matches my issue, I have a 2005 660 with a no start seems to lock up when the spark plug is in and cranks over fine when it's out, we have replaced the starter, battery ,carb and relay, and had the valves adjusted, and can not...
  2. Official Clutch Forum
    I just finished installing my JBS Sheave Kit. It seems to work fine so I'll button everything up tomorrow and hopefully go for a short ride! :s_cool:
  3. Grizzly Electrical & Lighting
    I thought I'd post some pictures of my Rigid 10" SR light bar . Super easy install and the light output is simply amazing . http://i1263.photobucket.com/albums/ii637/topazcat1200mxzx/Lights6.jpg http://i1263.photobucket.com/albums/ii637/topazcat1200mxzx/Lights1.jpg...
  4. Grizzly Tech Tips
    Installed a Warn XT 30 and it works great, but the wiring looks like a mess. Does anyone have any good pictures or suggestions of how they neatly organized/hid their winch wiring in the battery compartment, etc.?
  5. Grizzly Tire & Wheel Combos
    Got my Mud Trax installed today on my new 2012 Camo Grizzly. 26-11x12 and 26-9x12. These look and feel way heavier duty that the factory Maxxis. Can't wait to try them.:boxing: Before: After:
  6. General Discussion
    Well I ordered me a 2 Gallon fuel pack from Rotopax with the GR discount and the deluxe mount. Mounting it on the front or back rack really wasn't an option so I drew up a mount to mount it to the side of the back rack box and cut it out on the water jet. I bent the square part up on the...
  7. Grizzly Electrical & Lighting
    Finally got a chance to mount my D2's on my Grizz and swap my Daully's over to the wife's Grizz! My 700, Wife's 450,
  8. Grizzly Electrical & Lighting
    I had picked up a set of HIDs for the 660 from dzl450 awhile ago and finally got around to installing them today. As you can see, things are getting a little packed in the hood area. Just a note, if you need to splice into the factory headlight wires, Black is ground, Green is low beam power...
  9. Pictures & Videos
  10. Grizzly Chassis & Body
    I didn't get in on the group buy because I decided to take advantage of my 9 day "boys" trip to Las Vegas. I ordered the Ricochet full skid set directly from Ricochet and was able to bring them back to Canada duty free because of my length of stay in the USA. I saved a bundle compared to what I...
  11. Grizzly Accessories
    I purchased some heated hand grips from DK a couple months ago and finally got them installed tonight! They are called Hot Hands from Oxford, the install is very very easy the heater itself velcros around the hand grip and worked well with my hand guards as they clamp through the end of the...
  12. Pictures & Videos
    :p Got my Dually's mounted!!! Here are a couple of pics! thanks Again to Rigid Industries and Grizzly Riders!!
  13. General Discussion
    what did you guys think -- that i would do this to the wifes grizzly -- :s_laugh: - went from 12" wheels with 25" tires -- 8" frt (2 ply ) and 10" rears(4 ply) new wheels 14" and tires 26 -- 9" frt and 11" rears ( 6 ply) makes the machine 54"s wide at the tires -- but rock sliders...
  14. Grizzly Tire & Wheel Combos
    Well, I installed my new mods yesterday. Which include new rims and tires, front and rear bumpers, storage/passenger unit, and a 3000 lbs viper elite winch which I haven't got on yet. The storage compartment is nice, allows me to bring things I wouldn't have room for normally, keeps everything...
  15. Grizzly Electrical & Lighting
    So I finally got my viper max 3500# winch installed today. It has 40' of 1/4" synthetic winch rope. The install went easy once I got the viper mounting plate. I had a warn 2500# winch already and the wire was the same that fed that so I used that along with the contactor and handle bar mounted...
  16. Grizzly Electrical & Lighting
    Just installed a set of Lexan lens covers from Power form Pro ( www.powerformpro.com ) For those of you that didn't see my original post - the reason I did the Red was because with the Rigid 10" LED light bar + the set of Rigid Dually lamps, my headlights are basicly useless as far as throwing...
  17. Grizzly Snorkeling
    Hi fellas I finally finished my snorkel kit last week so I just wanted to show it off. Thanks
  18. Grizzly Accessories
    my friend has HID headlamps and they are way brighter than my factory ones. they are only $55 plus shipping -- i paid $20 for 2nd day air -- so it cost me $75 bucks and you can see the differance. here is the link to the website so you can read up on them -- yes waterproof , slimline, and...
  19. Grizzly Engine & Transmission
    I put the exhaust on the other night but had an issue with my carb. Today I got it all squared away so figured I'd post a few pics and a sound clip vid for ya's. I installed the quiet core also since I don't want to piss the neighbors off too bad when I'm out at night. My buddy Rich stopped by...
  20. Grizzly Chassis & Body
    I ordered a set of the ASR pro x tie rods with self lubricating chromoly heim ends last week and put them on today. These things are thick....lol, If I bend these chances are I have also totaled my 450. The heim ends are real nice also. They use a teflon/kevlar liner so no grease needed. I had a...
Top