Grizzly Riders Forum banner
issues
21-40 of 71 Results
  1. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey gang... brand new to the site. Having issues with my BB 400 4X2. Its a 2001 model, and when i bought it the carb was off of it and shot. It had been setting for several years with a coke bottle stuck in the intake where the carb goes. So here we go with what I've got...... orderd an...
  2. Grizzly Tech Tips
    Hello All, I have two 04' Grizzly 660s both of which were having issues starting. So I searched for a way to Override the start button because my drive selector indicators were not working. Even after adjusting the linkage I was still having issues. So using a few simple crimps, some wire and...
  3. Grizzly Snorkeling
    I have recently snorkeled and ran vent lines on my 2011 Grizzly 700(tougher than I thought) and have been riding it for say 3 months with no issues...recently I went riding and it was a lot hotter temperature wise and got the gas bubbling in the tank and had some issues with gas slowly but...
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I just bought a 2006 450 Kodiak and it runs great when giving it throttle but when letting off the throttle it takes a second or two for it to idle down and it also pops too on decel. I pulled the carb thinking that maybe the throttle plate may be sticky and not completely shutting instantly...
  5. Grizzly Dyno/Tuning
    I had my valves adjusted a while ago in 09. I've done alot of riding as well as carb jetting since then. I've never been able to get it to idle right in a long time. It skips at idle . When its warmed up it will rev too low and die even after I tried all kinds of idle screw adjustments. At times...
  6. Grizzly Accessories
    FYI While hooking up my moose blade this fall to get readsy for the season, i noticed some rust on oneof the welds, it was on one of the curved supports on back of the blade. I got a wire wheel and cleaned it up. There was a problem with the weld from day one, as you can see in the pic there...
  7. Industry News
    We thought we'd send a quick update to our members regarding the massive land use planning effort related to the Greater Sage Grouse. For those new to our Action Alert list, The Bureau of Land Management (BLM) and the U.S. Forest Service (USFS) announced the formal planning process to evaluate...
  8. Grizzly Engine & Transmission
    Hey all ...great site. It's gotten cold here -15c whent to plow yard and bike would not go into gear .... put it in heated garage drained belt cover , supprised how much water was in there ... cold hear again again tranny works good now.... now it won't go into 4x4 ...I can hear servo motor is...
  9. Grizzly Engine & Transmission
    I have a 2009 grizzly 350 irs 4x4. it has been rebuilt and bored. it wont idle now and it doesnt seem to run right at open throttle. i think the issue is my carb. it seems to be so lean at idle that it wont run. so to get it to run with the choke on the a/f screw is only 1 turn from being all...
  10. Grizzly Engine & Transmission
    Earlier in the summer i swapped frames on my 03' 660.(long story). Anyway prior to starting the project it started fine. Once I got it most of the way back together i went to start it up and all i get is a clicking/buzzing sound from the relay, and i can hear the starter turning. Relay is new...
  11. Grizzly Electrical & Lighting
    i was riding doing about 45, turned around in a field and started going again, while on the return trip it sounded like it misfired or skipped, i heard it twice and it lost power, but then would surge back up. then the electricals up front cut out.. headlights, speedo light etc. but kept...
  12. Grizzly Engine & Transmission
    i have an 02 660 and i have run into a slight snag. during the summer while riding it around work, she just quit on me. it would start on full choke and run but as soon as you reduced the choke or hit the throttle it stalls. i let the machine cool down thinking maybe it just got hot but that...
  13. Grizzly Engine & Transmission
    Just rebuilt the carb off a 98 Grizzly 600 Replaced all jets needle valve and float valve. When upright air blown into bowl passes when upside down it stops like it should. Float is at correct position, but doesnt seem to want to draw fuel to start. A small bit of starting fluid will fire it...
  14. Grizzly Talk
    Need help.. 09 Grizzly won't back up.. It was doing the engine dying surge at first then I found a thread on jumping the reverse switch.. Presto it now rev's fine but the machine acts like it's still in neutral.. Tried adjusting the gear selector in all directions and it's still doing the...
  15. Official Clutch Forum
    Less than 200 miles on new pads from Walt, there toast, atv would barley move, the odd thing is only the ends were down to metal shoe, the other side or pin end looked brand new, did I somehow install them wrong, they were replaced with new oem springs, the clutch housing at time of replacement...
  16. Grizzly Electrical & Lighting
    the short version, I just got this running a 68 miles ago, got it out of a friends back yard, brand new top end, new stator ( had no spark when I brought it home) custom oil cooler ( see other post) anyway was cutting the grass pulling a 60" swisher mower, almost done and thinking it's finally...
  17. Industry News
    Panel of 10 rural sheriffs will speak on hot issues Hey BRC members in Northern California, Red Bluff, CA - Ten Northern California Sheriffs will hold a public meeting on Saturday, June 23rd speaking on the Constitution and local issues plaguing rural counties. Tehama County Sheriff Dave...
  18. Industry News
    BLUERIBBON COALITION LAND USE UPDATE Colorado Parks and Wildlife Issues Fire Warning Dear BRC Action Alert Subscriber, The Colorado Parks and Wildlife announced Wednesday that county fire bans and restrictions will be strictly enforced in state parks and wildlife areas because of the extremely...
  19. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I have a 2005 kodiak 450 that i have had this isssue with before. The issue is that when i would try to start it the solenoid would just click. So we found out that the connections on the solenoid were loose. Well yesterday it was clicking again, so i tightened the connections on the solenoid...
  20. Grizzly Electrical & Lighting
    2005 Kodiak 450. I'm having some electrical issues with my Kodiak. It all started on my last ride when my screen kept going in and out. After a little while it just went out completely but everything else on the bike worked perfectly. Yesterday I decided to mess with it so I pulled all the...
21-40 of 71 Results
Top