Grizzly Riders Forum banner
issues
41-59 of 71 Results
  1. Industry News
    BLM Greater Sage-grouse Conservation BLM Sage-Grouse and Sagebrush Conservation Wester Region Meeting Schedule Eastern Region Meeting Schedule How To Comment National Greater Sage-Grouse Planning StrategyIssue No. 1, December 2011 Map of BLM and Sage-grouse NRCS Sage-grouse Initiative By State...
  2. Grizzly Electrical & Lighting
    Hey guys, new to the boards here and I thought I would bring my problems with me for some help. I recently bought a used 2004 Grizzly 660LE that has some electrical issues. The dash doesnt work, but everything else does. When I bought it, it was charging at 18v, and cooking my battery so I...
  3. Grizzly Engine & Transmission
    I replaced my needle and seat in the carb because it was pushing gas out the bowl drain and also into the oil. Well, I still have a very strong odor of gas in the airbox and filter. Haven't checked the oil yet. Nothing out the drain tube from the bowl. What'd I miss?
  4. Grizzly Electrical & Lighting
    Hi All, I have a 2005 Grizz 125 that has been getting harder and harder to start. Turn key on Push kill switch to on Put shifter in neutral (required for the 125) Hit the start button The starter would make a cranking sound but not engage until after several tries so I figured starter must...
  5. Grizzly Dyno/Tuning
    Having problems with my carb jetting ive added a hmf pipe and a k&n air filter. Before i changed my jetting it would fire up great and idle good. I put a fmf jet kit in including the spring needle on the 4th clip and i put a 155 jet in now when i start it it won't accept throttle until it has...
  6. Grizzly Tech Tips
    Has anyone had issues with thier parking brake cable freezing up so you can't get the grizzly out of park? This has been an issue with mine for a while now and it getting worse. What should I do to solve this issue? Should I just remove the cable or what?
  7. General Discussion
    Having an issue with my engine brake(02 660).At lower speeds it acts like it wants to freewheel and sounds pretty bad,other than that it does not seem to affect performance.Any advice is appreciated!
  8. Grizzly Engine & Transmission
    My 450 has 631 miles on it, and 90.4 hours. As of late, it doesn't like to idle, it used to idle forever and just run, but now it will only idle for about 1 minute before it shuts off. If it's on choke, it runs fine, if you're driving it, it runs fine. After it shuts off, it will always start...
  9. Industry News
    James Stewart is Sorry for Incident, Will Continue Racing Orlando, FL - March 30, 2011 - On Monday, March 27, at 4:50 p.m., James Stewart was arrested for allegedly impersonating a police officer.* The incident occurred on Florida's Highway 417 in Orlando, as Stewart was taking a friend to the...
  10. Grizzly Talk
    I was going over my machine checking bolts and such. I noticed something that I had not really paid any attention too earlier. 1st isssue- the plow mounting bracket (mid frame mount) is held on with small 1/4" ubolts around the lower frame member thru the plate. 2nd issue - 2 small pins take...
  11. Grizzly Engine & Transmission
    hey guys, 1st time poster, been lurking for some time though. I have an 06 grizzly 660 and need some serious help. the atv is at the farm so i cant go and tinker with it along with the fact that i am an engine idiot. i was relayed the message that it is starting to have some major issues. it...
  12. Website Help & Comments
    Hey guys, there are issues with the hosting server. I have been having all sorts of access issues lately. I am working with the host trying to resolve the issue now. Just wanted to let you guys know.
  13. Grizzly Electrical & Lighting
    I think I remember Keeter saying he had this issue but I went out for a few hours tonight and my Duallys were acting up. Not all the time but for a lot of the time it was like a fricken disco with the lights strobing like crazy. So for anyone who had this happen what was the cause of it? I'll...
  14. Grizzly Electrical & Lighting
    okay guy so i relocated my HIds to under my back set where i have all my electonics at and i notised that when i turn them on i can hear it sparking over to the other wires and the HIDS wouldnt fire up, so i put some better insulated wires and they were working a lot better but i stil notice...
  15. Grizzly Electrical & Lighting
    i bought the same HID's i have on my grizzly -- they work great on my grizzly but have issues on the new can am -- this was my first post on both can am sites and no help at all !!! maybe my grizzly friends will know something . ******************************************* with the digital...
  16. Grizzly Tech Tips
    My grizz 700 started spitting and sputtering when i put it in reverse in a mudhole and it didnt even when i had my thumb on the reverse over ride button. Any one have ides whats causing this? heres the video so you hear what its doing. If you can see the video let me know. The video was posted...
  17. Grizzly Tech Tips
    I have a 2002 660 and I think my issues might involve the clutch. on the bottom end from a stop it has no power. the clutch DOESNT slip, it does almost the opposite. it bogs down and acts like its pulling a heavy trailer or something. nothing is hung up, the brakes are all free. I was thinking...
  18. Grizzly Electrical & Lighting
    I checked out the servo with the 2 plugs plugged in and hanging off the front diff with the green marks lined up properly on the servo, and hit the 3 & 4 wheel button and back several times and it all worked fine . Installed the servo with the gear track all the way left , filled the diff with...
  19. Website Help & Comments
    We are currently having issues with the server that GrizzlyRiders is on. The issues has been addressed by the hosting company and they are working to resolve the issue. Please be patient and sorry for any inconvenience.
41-59 of 71 Results
Top