Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 144 Results
  1. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey all, Just inherited a 90 something Kodiak. IT almost runs! Have some really basic questions though. How do I figure out the year? and where is VIN? Next question, it seems to be permanant 4x4. There's not switch or lever I'm missing somewhere right? Next question... I put it up on jack...
  2. Grizzly Talk
    Hello, I am new to the fourm. I was wondering what your opinion is on grizzly vs. kodiak. I wold be using it for (and not limited to) the following: Plowing Towing (medium to heavy loads) Transport Firewood (the whole process- winching down trees, dragging logs, everything :wink2: Thanks...
  3. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I have a 97 Kodiak that I have tried 2 Zoom Zoom carbs, junk. Has anyone have any better luck with another company? How about GPA MOTORS? Looks like that carb comes with a few jets but not the 105 main jet needed.
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    No spark. Start button tests ok with meter but no effect when pushed, can engage starter by jumping relay (replaced solenoid - same deal.). Not sure where to go from here?
  5. Grizzly Engine & Transmission
    So, I've been wanting to put a K&N YA-3504 on my 2018 Kodiak for awhile now but K&N says they don't make one. Rocky Mountain Motorsports lists it as an available item that fits the Kodiak. I called them and they say it has been tested and works on that machine. Has anyone used this filter on...
  6. Kodiak/Big Bear/Bruin/Wolverine Discussion
    got a 05 kodiak 450 my buddy crashed it and broke the front plastics and bent the front bumper, looking to maybe get aftermarket bumper if they make a nice one or should i just go factory
  7. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I was given a this atv because it would not start and I’m stuck right now and don’t know where to go. When I turn on the ignition I get dash lights. Ill cycle the shifter I get neutral light, reverse light and park light. I get head lights but I get nothing from the electric start no noise or...
  8. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey guys new to the atv world just bought a 2005 kodiak. Everything seems great with the quad most of the time. But sometime will go to start and nothing will happen no clicking at all. All the light work led screen lights up. Just won’t start. Then if you just keep trying it will randomly...
  9. Grizzly Talk
    I have a 2003 Kodiak 400 that I’m thinking of handing down to my son. I’ve been eyeing a new Grizzly, and I just need a push, Anyway, last weekend, I let my son ride the 400 to see if he was interested, while I suffered on an old Suzuki LT125. Still recovering. He stopped along the trail a...
  10. Grizzly Electrical & Lighting
    Hi there. Having a few issues with our Yamaha Kodiak 450. It's an intermittent electrical fault where sometimes all the electrics cut out fully when being ridden, or other times when you go to start it. It completely cuts out the screen is blank, zero electrics. The battery is new and good, as...
  11. Kodiak/Big Bear/Bruin/Wolverine Discussion
    This 97 Kodiak 400 is very hard to start cold. Eventualy it will start and run OK. Took it to local shop where they pulled the carb apart and cleaned. Now they are telling me that a "nozzle" is shot and they can't get the part. WTH ?? First of all what nozzle? Do they mean jet? Never heard...
  12. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I recently purchased a 2011 kodiak 350 that has a rear wet brake but it may as well not be there at all since it doesn’t work. If it weren’t for front brakes and engine braking my grandson would be in real trouble. My dealer has suggested that I buy a new rear differential but he has also said...
  13. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, looking for some advice from the electrical experts out there. I have a 2004 Kodiak 450 auto, that died while plowing snow last winter. No spark condition. I took the easy way out and replaced the coil and cdi box. I know the coil is good, and with a new cdi box it fired right up and...
  14. Kodiak/Big Bear/Bruin/Wolverine Discussion
    When engaging 4WD sometimes it is silent, sometimes there's just a click, and most of the time it's a pretty solid thump when it engages. Normal??? Sent from my iPhone using Tapatalk
  15. New Member Introductions
    Have been poking around this site for a while looking for help and have found lots of good info...but now I'm stuck. 2013 Kodiak 450EPS. (Same as a Grizzly) Shocks are shockingly bad and I'd like to replace them but I can't find much info for this model year. Current shocks Front...
  16. Grizzly Talk
    Last night when I fired up my grizzly, it was about -25C ambient tempurature. It took a few tries, but other than that, I've never had cold start problems before. I let it warm for a good 10-15 minutes. When I shifted into reverse to back out of the driveway, I got about 2 feet and heard a...
  17. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hi all. Like many people, I stumbled across this site looking for the answer to a mechanical problem. I've owned, since new, an'07 450 Kodiak. (Canadian machine) Great machine and trouble free till now. Long story short, the front bolt on the rear diff housing broke, fell out and the diff...
  18. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, looking for a little help. I have a 93 kodiak 400. It was leaking oil from the front output shaft on the transfercase, ordered new seal and went to put in. Removed t case from quad (yes nuts were loose possibly causing leak as alot mention) but seal is also damaged. Ut presses in...
1-18 of 144 Results
Top