Grizzly Riders Forum banner
light
1-17 of 85 Results
  1. Grizzly Electrical & Lighting
    I have a 1998 Yamaha Grizzly 600 YFM600FWA 4WV5-010 here with an overheating issue - the oil cooler fan is not turning on and eventually the Oil Temp red light is illuminating. I've read a number of old posts that indicate these run hot and gave some start points. So far I have: Tested that...
  2. New Member Introductions
    Hey ladies and gentlemen just had quick question about an issue with my grizzly. 04 grizz 660. Some days it will do this and some days it will not. Mostly on crisp or cold temps the reverse light will blink. I've narrowed it down to what I think it may be but I would like some opinions about it...
  3. New Member Introductions
    I have an 06 grizzly and sometimes once it's up to temp and I put it in high the reverse light flashes and I have noticed that there's is a mod where you ground something out but I'm not sure what that does for sure and it has not been done and also my speedometer quite working first time the...
  4. Grizzly Electrical & Lighting
    Some history here as it may help, I ran my 2007 grizzly 700 low on coolant and took out the head gasket, I found another engine from another 700 grizzly with the 770 big bore kit( less the 400km on the build) I did a swap over with mine, fired it up and the EPS light is on and the engine light...
  5. Home Page Features
    Enter for your chance to win so you can light up your next ride ATV.com and QuadBoss are giving our readers a chance to win a brand new QuadBoss LED Light Bar valued at more than $300. Specifically, we are giving away a QuadBoss Single Row Hi Lux 39.5″ light bar, along with a DT wiring...
  6. Grizzly Engine & Transmission
    Hey i got 2016 Yamaha grizzly 700 se. Recently the coolant light came on and when i got home i realized my rad was pretty plugged and figured it had actually got to hot and spit some of the coolant out as i had to fill my coolant jug up it was empty. All was good took on a ride or 2 had no more...
  7. Grizzly Dyno/Tuning
    Okay so I installed a new temp light sensor and still the same thing ( light staying on ) could it be a another bad sensor ? Order new from online factory OEM When I touch the end of the connector wire to the motor or frame the light goes out , connect to the sensor and the light goes on lol ...
  8. Grizzly Electrical & Lighting
    I have a 2002 660. The shift lights have decided to stop working, while both the high temp and the differential lock light now stay on all the time. I've checked the electrical connections for both the diff lock and the temp sensor. Both are fine. With the Grizzly off, I've turned the switch...
  9. Grizzly Electrical & Lighting
    Soo I have this problem on 04 kodiak 450,. I turn on temp light comes on.. Goes out, but when I hit throttle the light comes on, and it sounds like engine miss firing or braking up..I have cleaned all connectors and applied die electric grease.. I changed all fuses out..n even cleaned kill...
  10. Grizzly Electrical & Lighting
    Hey everyone, I wanted to add a high beam indicator light to my 2013 Grizzly 700. Can anyone provide me the schematics? Thanks
  11. Grizzly Electrical & Lighting
    A Grizzly rider on another forum installed an LED Tail Light bulb in his Grizzly and I thought it sounded pretty cool so I did the same today. Man, that sucker is BRIGHT! This will really help other riders see me hit the brakes during daylight riding. I got it at superbrightleds.com The...
  12. Grizzly Electrical & Lighting
    The reverse light on my 2002 660 blinks when I first start it. I have to shut the ignition switch off and restart quad and light goes off. I also have a sputtering problem while climbing hills. Read a few posts and wanted to know if they could be related. Have cleaned carb and changed spark...
  13. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hey all, I am having a problem with my 2000 kodiak. While driving in high gear the reverse light cut on and it still remained driving forward. The only problem was it would not go over the speed it goes in reverse. I have searched for answers and think it may be the neutral safety switch but am...
  14. Grizzly Electrical & Lighting
    Just bought an 06 660 and while I was doing all the maintenance discovered I have no tail lights or break lights I have changed the bulb and tightened up the light switch by the foot break and nothing any help would be appreciated
  15. New Member Introductions
    2014 grizzly 700 pc5 hmf performance series with quiet core 28in backs 20 in 120 watt light bar 2in lift Was riding ins trails bike started missing slowed down to check and it died tried to start missing running rough. Turned off light bar ran fine with all lights off ran fine turned...
  16. Grizzly Tech Tips
    Well, I've searched around on different forums, and somehow I haven't found anyone else who has had this problem. Recently, my '06 660 Grizzly has started sputtering, missing, and throwing on the Diff Lock LED sporadically once I get it over 20mph. I've changed the oil in both differentials...
  17. New Member Introductions
    I just bought my first new to me Grizzly 05 660. I had to replace the tail light and it seams too bright. My question is there a break light switch that might be stuck causing the tail light to be so bright. I tried all the break levers and no change in tail light brightness.
1-17 of 85 Results
Top