Grizzly Riders Forum banner
1-8 of 8 Results
  1. General Discussion
    Changing out front lower boot with some pics Ordered Yamaha front lower boot replacement kit 28P-2510G-00 which consisted of 5 parts. The 4 parts pictured plus a plastic bottle of grease... First time doing this and the videos I've seen entail removing the entire axle then removing the top...
  2. New Member Introductions
    I bought a 2007 660 Grizzly from a friend of mine. When I bought it, he has 27" tires on it and a clutch kit from EPI if I remember right, but everything else is stock. I took off the big tires due to not really mud riding to often, more fast trail riding or taking the kid for a slow ride...
  3. General Discussion
    In the process of replacing the front wheel bearings, got the one side all torn apart went to do the opposite side and got everything but the lower ball joint anyone have any suggestions of how to get it without screwing it up I have wd soaking in now! Thanks!
  4. Grizzly Talk
    Sorry if this is already posted but after a search I could not find any info.. so anyways... After doing some reading (this forum is great) I discovered the clunking noise the odd time while cornering is (probably) coming from a loose lower castle nut on my left front lower A-arm. I removed the...
  5. Grizzly Chassis & Body
    Well, after 7000 miles, my grizzly had a ball joint failure. I was suspecting they were going, so had delegated the grizzly to backup ATV status, and was only using it sparingly until had time to replace the joints. Unfortunately I had to lend her out to help on trail maintenance here in MI...
  6. Grizzly Chassis & Body
    I have no idea HOW i did this, but it sucked. look at how the bend is dead center where yamaha puts in the "reinforcement" piece... I got lucky this arm crumpled. The ball joint is fine, the gussets are fine (whew). the bottom of the shock where the lower bolt goes is not aligned, I'm going to...
  7. Looking to Buy
    wtb: 700 front lower a-arm. passanger side.
  8. Grizzly Talk
    I have a problem... more like an issue... I bought my atv out of state and i got the recall notice for the possible failure and the recall of the lower stem piece the tie rods attach to. I have called around to multiple dealers and asked them.. can i just give you my vin and pick up the part...
1-8 of 8 Results