Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 45 Results
  1. Grizzly Accessories
    So I took the motor off the winch with the 2 bolts that hold it on to look it over. When I went to put it back on, the bolts have nothing to screw back into, I tried to turn the winch to see if the alignment moved but not the case. Am I missing something, lol I feel like a dummy but can't figure...
  2. Grizzly Tech Tips
    Hi There, I have a 2008 Grizzly 700 EPS. It was bought last January and the EPS never worked since I got it. I have purchased a used EPS motor and would like to replace it myself. Taking it to a ATV shop really isn't an option since the closest one is 4.5 hours away. I have looked at the...
  3. Grizzly Talk
    I changed my oil last weekend and I went to full synthetic. I did some research on what oil I should use and found that guys were running it and liking it. I also grabbed a Mobil 1 M1-110 oil filter. After the change I fired it up let it run for a bit and shut her down pushed it aside. I took it...
  4. General Discussion
    Can someone give me an idea where the starter motor is located on a 2011 Grizzy 350 4x4. Better yet what needs pulled off to get to it (if anything). I need to clean and check the cables to the starter motor, it appears, my sons been running it in deep water, and he finally told me he hasn't...
  5. Grizzly Tech Tips
    Just picked up a 2010 4 wheel drive 350. Thought the rattle might have been valve adjustment . Adjusted valves, noise still there. Anyone else encounter anything like this
  6. Grizzly Talk
    I just launched a new site that deals with all and any problems with the 4wd system on Yamahas. I have how to videos for testing the servo, disassembling the servo, replacing and purchasing the servo (motor only), testing relays, and testing the push button switch. I also have a link to...
  7. Grizzly Tech Tips
    I made another video on how to change the servo motors in the older model Yamahas 98-01 with the sealed servo assemblies. Its easy to do and will take you about 10-15 min with basic tools.
  8. Grizzly Electrical & Lighting
    I have a 2009 grizzly 700 and am getting a bit frustrated with the power steering. It not that hot where I live, maybe 80 max so I don't think that's the problem. Even a short ride in the tight wooded trails and my PS seems to shut down from heat. Even on open trails if it don't shut down, the...
  9. Grizzly Electrical & Lighting
    Can you test the actuator motor, with batteries, while it is still conected to the differential?
  10. New Member Introductions
    My local dealer told me to direct wire the fan and see if the fan goes. That will tell me if it is the fan motor or a relay/fuse. Where do I hook up the battery?
  11. Grizzly Talk
    Yamaha 4wd Servo (motor only) Replacement - YouTube Made a new video that includes all three types of servo motors that Yamaha makes. It shows how to disassemble and replace the motor inside your servo assembly. Also I have added more models to the list that the motors fit. Here is the...
  12. Industry News
    BREA, CA - March 2, 2013 - American Suzuki Motor Corporation (the "Company") today announced that the Honorable Scott C. Clarkson of the U.S. Bankruptcy Court for the Central District of California in Santa Ana approved the confirmation of the Company's Chapter 11 Plan, which creditors...
  13. Kodiak/Big Bear/Bruin/Wolverine Discussion
    hi How can I tune the engine for more acceleration and horse power its a Kodiak 400 4X4 Year 2000 - YFM400FWA (M) I thought of these adjustments -bigger Jet -polishing the inlet -Outlaw Clutch Kit -Air Filter Are there more adjustments that you can do ? which of these adjustments is...
  14. Grizzly Tech Tips
    Made a video for the installation. This was on an 07 Grizzly 700 so it'll be the exact same on the following models. 07-11 Grizzly 700 08-11 Rhino 700 07-11 Big Bear 400 08-11 Grizzly 450 09-11 Grizzly 550 Any other model from 02-06 will be basically the same you'll just need a tamper proof...
  15. Industry News
    AURORA, IL - December 10, 2012 - *Feld Motor Sports® announced today that the popular KTM Junior Supercross Challenge (KJSC) that will be making its return to the 2013 Monster Energy AMA Supercross, an FIM World Championship, will also be debuting at the Wilkes Barre, Pa., (February 9) and...
  16. Grizzly Engine & Transmission
    Ok this may be a stupid question but is there any way to turn a 700 motor into a carb'd motor instead of efi? If so I will explain my plan
  17. Grizzly Engine & Transmission
    So I've finally got my trashed motor off my 07 Grizzly 700. I've found another motor but it's off a Rhino 700. The motors look exactly the same except for the output for the rear driveshaft. The Rhino uses a u-joint and the Grizzly just has splines on both ends. It looks like I can take the nut...
  18. Grizzly Engine & Transmission
    I have a question about motor oil and gear oil. I have a 2011 grizzly 450 eps 4x4 at 15.5 hrs. My next ride should put me at 20 or more hrs. I was thinking about changing before the ride. I have looked at several post's and kinda decided to go with Valvoline but not sure which weight and...
  19. Grizzly Engine & Transmission
    I've decided to just get another motor instead of trying to rebuild mine. A bunch of guys have asked me if I'd sell them my old one but I have no idea what it's worth. It needs a full top and bottom end rebuild. Crankcase isn't busted. Crank/rod, piston, valves and cylinder are trashed. Anybody...
  20. Grizzly Talk
    I found a way to replace the servo motor only on the newer 700's. Some of you may remember my older post about replacing them in the 02-08 660's. While I can still can get those motors as well. I finally got the newer servo motors back from the machine shop. The newer ones fit the following...
1-20 of 45 Results
Top