Grizzly Riders Forum banner
problems
1-18 of 68 Results
  1. Grizzly Tech Tips
    I'm repairing many electrical problems. Neutral light goes off if I turn on headlights. Start button doesn't work, so I have to jump solenoid. Cooling system doesn't work (tested fan, it works). Going to check continuity on the lighting system. Do a resistance check on temp sensor. Any...
  2. Grizzly Tech Tips
    Hey everyone, im new to this website and just joined because ive been having some issues with my 07 Grizzly 660. So about a year ago I purchased my quad and since I got it ive installed a triangle atv snorkel kit, and a hmf performance slip on exhaust. So ive noticed since I installed the...
  3. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Hello all, looking for some advice from the electrical experts out there. I have a 2004 Kodiak 450 auto, that died while plowing snow last winter. No spark condition. I took the easy way out and replaced the coil and cdi box. I know the coil is good, and with a new cdi box it fired right up and...
  4. Grizzly Engine & Transmission
    I was riding my 03 660 today and all of a sudden out of nowhere it just stopped dead in its tracks, still running but would no longer pull itself in any gear. It's fully automatic. Probably simple for an experienced rider but I need to ask what's the first thing to check?
  5. Grizzly Engine & Transmission
    I have a grizzly 660 with a BBK and aftermarket exhaust. I put in a larger jet kit as well and on flat ground it runs great and sounds great. When I put it on a hill and give it throttle it starts to spit and a little black smoke comes out. Any help would be appreciated!!!
  6. New Member Introductions
    I have a 2006 Yamaha Kodiak 4x4. My son was riding it and the rear wheels locked up momentary. Now There's a clicking noise. And the shifting is all messed up. I pulled the primary off and the shifting works fine, but when I put it all back together it binds up again and messes the shifting...
  7. General Discussion
    Hey guys I'm new to the group maybe yall can help me out. I just installed a EPI utility clutch kit on my 2004 Kodiak 450. It came with Springs for the wet clutch, weights for the primary and the blue spring for the secondary. Prior to doing so I was having a little back shift issues and it has...
  8. New Member Introductions
    Ok so I am new to this site and thought that I would give it a try. I have a 2014 yamaha grizzly 700 artic camo/white camo not really sure exactly what it's called but I bought it brand new at the dealership it was marked down because it was last years model and they wanted to get rid of it. so...
  9. General Discussion
    Hey guys needing some help getting my grizzly back up and running I haven't ben getting spark to the plug for a few days bike has Ben turning over fine with plenty of gas went messed 29th it today it turned over then quit and now I'm getting a clickin noise from the kill switch at the connector...
  10. Technical Articles
    so i let my friend ride my baby :banghead: and he forgot to press the brake before shifting. well he managed to force it into the neutral position from park without pushing the brake for the interlock and now it wont go into park and it super hard to get it back down that far (2 hands) so...
  11. New Member Introductions
    New to this site by virtue of purchasing an 07 Grizzly 350 4x4. I hope someone can help. I purchased this Grizzly for $500.00, not too bad of shape with the exception of one issue. When the machine is in neutral, it will roll for about a foot and the back wheels lock up.....like it was placed...
  12. Grizzly Talk
    Hey guys I'm new to the site hopefully I'm in the right spot. Here's my problem I've got a 98 grizzly 600 and today I was riding it and all of a sudden it started grinding like it popped out of gear. Then I tried reverse... same grinding noise. I locked it in 4x4 and the front end pulled me...
  13. General Discussion
    I have a 2000 Grizzly in 600cc aand it started acting up, I went through a crick that was only a little deeper than the floor boards were and it ran fine went right through no problem. About a week later I tried starting it up for a ride and it wouldint stay running for more than a couple of...
  14. 2012 Grizzly of the Month Winners
    i was playing around in a creek last week with a few of my buddies and my front wheels quit pulling when i was trying to come up the bank, i don't know really know whats going on. If you lift the four wheeler up and put it in 4x4 just the back tires spin but when you put it in diff-lock its like...
  15. Grizzly Engine & Transmission
    I've got my grandfathers old 600 grizzly. As long as I can remember the electric start has not worked. So I've just been pull starting it, up until last summer I had no clue what was wrong with it. I pulled it apart to put a pickup coil in and found the problem. The lecture start had not been a...
  16. Grizzly Electrical & Lighting
    Well i have searched and read about the different setups on this forum but im still having issues, so any help would be greatly appreciated. I have a 700 grizz with an earthX battery under the seat to power the warn wireless. I am using a blue sea battery isolation relay and have hooked...
  17. Grizzly Snorkeling
    I just recently installed my homemade snorkel for my grizzly 350. And went out to the the park yesterday. The snorkels dont leak or anything. But when i got in water over the exhaust, my 350 started spitting and sputtering then shut off. I have what i think all lf my vent lines ran. One for rear...
  18. Grizzly Electrical & Lighting
    Installed fog lights per wiring diagram found on line. Now all other lights are out. Used high beam light wire (yellow), per the diagram, installed relay and fuse link. Disconnected wire scotch locked on yellow lights and got regular lights back. Any ideas.gr rules
1-18 of 68 Results
Top