Grizzly Riders Forum banner

questions

  1. Grizzly Electrical & Lighting
    2004 Grizzly 660, Winch, Thumb/Grip Warmers I have been only using the quad only for plowing the driveway, so it doesn't get much use. I wanted to get the quad ready for the winter this year and wanted to fix this issue once and for all. I have been having an issue for a while now and I...
  2. Grizzly Talk
    I have a starter/relay issue. the grizzly wont start the normal method (ignition on, in park, kill switch off, push start button), and by bypassing to starter relay the starter starts to turn, but stops after 1 sec. I believe the starter and the relay are bad. I have been through 4 relays in 4...
  3. Grizzly Talk
    2017 Grizzly coming soon... deposit is placed and i am awaiting arrival at the dealer. I know that lights dont match... i am not a carpet not matching the curtains kinda guy. I used search... I searched LED, Light Pod, LED Bulb, 2016 light bulbs... and others... I got alot of results! But none...
  4. Grizzly Talk
    Hi All I recently purchased a 2009 Grizzly with 7500km on it. It was well maintained and doesn't appear top have been beaten. It does however have one concerning "CLUNK". When the engine is at idle and in any gear including neutral. If press the throttle there is an audible clunk right as the...
  5. Grizzly Specifications
    I am new the the whole ATV thing and I have a few questions. I just bought a 1999 600 Grizzly with about 2400 miles on it. 1. Is that a lot of miles on these quads and what would be a priority to check out first. I guess what Im asking is what generally goes first. 2. On my 1999 grizzly i...
  6. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Got a few questions, may seem simple and stupid, but feel the need for reassurance. Just picked up a 01 Kodiak 400 4x4 ultramatic. Felt like popping the side cover off because previous owner said they replaced stator, and I wanted to make sure it was done right. First noticed woodruff key on...
  7. Grizzly Chassis & Body
    Okay, so I just bought a 2002 Grizzly off of Craigslist for $1800.00 witch isn't bad up here in Alaska. The wheeler was well used but not abused and is just shy of 5,000 miles on it. I pulled the front and rear knuckles off to do wheel bearings and the left front knuckle the bearing had...
  8. General Discussion
    Changing out front lower boot with some pics Ordered Yamaha front lower boot replacement kit 28P-2510G-00 which consisted of 5 parts. The 4 parts pictured plus a plastic bottle of grease... First time doing this and the videos I've seen entail removing the entire axle then removing the top...
  9. General Discussion
    Anybody know the axle nut size on a '11 Grizz 700? Also, could use a link to maybe a youtube video or a how to thread explaining how to change out the lower front boot.
  10. New Member Introductions
    I am looking into buying a 700 se in the flat black plastic but am leary. Does anyone know if the plastic discolours when bent like the blue ? I had a 09 550 grizzly in camo and loved the fact that it didnt discolour if creased or bent
  11. General Discussion
    hey guys new here and just bought a 2002 Grizzly 660. it has 1167 miles on it and is all stock but the rims and tires. just seeing what ppl do to there 4 wheeler aftermarket and performance wise, also what is the top speed on these? i had mine out today and it only would go up to 50mph, and i...
  12. New Member Introductions
    Hello I am new to this chat forum, but tomorrow I am going to look at a 4 wheeler and I am taking a mechanic with me to look over since it is used! I have never owned a grizzly. I am going to copy the info I was given and a pic of what I am going to look at and hope for awesome replies and...
  13. Grizzly Talk
    Just bought a repo from my bank. Took a chance on it buying it as is but the bike seemed well maintained. Its a 2013 700 eps special edition. So far it seems great. My main concern is the tire setup. Running 30x10x14 silverback x lites with a lift. I had a king quad a few years back with...
  14. Grizzly Tech Tips
    We'll the grizz got me again I just ordered the EHS bullet box and 2r tip yesterday. I fully intend on doing the EHS intake box cover but I'm a little confused on the filters. 1. Hanger mod??? I've seen a few posts about it with picks and this is what I have gathered. Your just basically...
  15. Grizzly Tire & Wheel Combos
    I have an '06 660 with stock tires on it still. I am ready to buy some new tires. What are the pros and cons of going with a little bigger tire (26" or maybe 27")? Should I stay with the stock width? I will be using my stock wheels. Next, any suggestions on tires for rocky desert...
  16. Official Clutch Forum
    First, let me say hi to everyone, as I am new here. :s_hi: So I have a ton of questions. I have read multiple stickys about the clutch setups and I have a pretty good understanding of what does what now, but there are some more specific questions I have that I can not find the answers to...
  17. Grizzly Talk
    Any one running 26-9-12 all the way around in all 4 corners. looking at getting kenda Bearclaws HTR for the 550 and want that little extra ground clearance.
  18. New Member Introductions
    Hello all...new to forum....I just bought a 1998 Grizzly 600. ITP Mudlites are worn out. I am looking to upgrade tires/wheels. I have a few questions. My current setup is 25x8-12 (12"dia.) on the front and 25x11-10 (10" dia.) on the rear. I am looking at going with either 26" Maxxis...
  19. Official Clutch Forum
    okay so here it is im sure this has already been talked about but not sure im ordering a set of 28 skinny to put on all corners an im wanting to know do I need to do any clutch work to be able to keep my wheelies going or do I have enough with just my 1.5mm shim my bike is a grizzly 700 2013gr rules
  20. Grizzly Tire & Wheel Combos
    Hi everybody. Im looking to put some wheels and tires on my 2012 grizz 700. Its pretty much bone stock since ive hardly had it a month. Im looking for 27-28 inch tires and 14 inch wheels. Im leaning towards the mega mayhems putting them on 14 inch itp 212 rims. I have a few questions Im hoping...
Top