Grizzly Riders Forum banner
rear
1-20 of 170 Results
Advanced
  1. New Member Introductions
    So heard it’s a common problem for the grizzlys to brake the rear diff mounts and have heard rumors of an aftermarket brace/support that a person can buy to replace those mounts.. question is does anyone have a link or clue if they will ship to Canada or does anyone have pics for ideas to build...
  2. Grizzly Chassis & Body
    I have a 1998 Yamaha Grizzly 600 YFM600FWA 4WV5-010 here. It looks like the rear shock has a breather tube coming out the top: Any ideas on where it should go or should it just be loose like this? I cannot see any reference to it in the Service Manual.
  3. Grizzly Engine & Transmission
    Are all Grizzly 660 differentials interchangeable? Or is 2002 different from the rest? Sent from my iPhone using Tapatalk
  4. Kodiak/Big Bear/Bruin/Wolverine Discussion
    Ok Im trying to rebuild a Big Bear rear end. Ive got all the parts for the swing arm pivot. Now Im stuck trying to find the bearing that is pressed on the axle. Is there a seal and bearing for that side? Also whats the best kit to rebuild the rear diff?
  5. Grizzly Talk
    On my 2010 350 I have switched out the calipers on my front end ... BUT for the life of me I cannot find any brakes for the rear? The axel does not have disc breaks in the back like the front, no drum brakes that I can find next to the wheels where the disks would be? According to the web...
  6. Grizzly Talk
    On my 2010 350 I have switched out the calipers on my front end ... BUT for the life of me I cannot find any brakes for the rear? The axel does not have disc breaks in the back like the front, no drum brakes that I can find? Are they in the final gear case somewhere?
  7. Grizzly Tire & Wheel Combos
    Can someone please tell me what is the best way to change the inner, rear boot on CV joint on a 2012 Grizzly?
  8. Grizzly Specifications
    Today while riding at Chadwick riding area here in Missouri I finally managed to crash my Grizzly. While going down a trail I ended up going over a drop that was much higher than I thought. I ended up dropping almost straight down and going over the front handlebars. The ATV rolled over once and...
  9. Grizzly Tech Tips
    Hello I just replaced all the pads on my 02 660 and I have no back brakes. To be honest they did not work that well prior. The pistons were pretty stiff to push back (used C clamp). I have manually bleed them and used a vacuum pump. I can only get fluid out of the rear bleed valve. I can not get...
  10. New Member Introductions
    Bought a 2005 Grizzly 660 that needs some help and is a fall project for my daughter and myself. I believe it has been ridden hard at one time... lots of little issues, but not sure where to start on this one: 2wd does not work and only the front wheels have power in 4wd. I'm thinking trans...
  11. Grizzly Specifications
    I have a 2014 grizzly 700 when turning at low speeds or braking at low speeds I get a clicking noise from the rear diff and it’s not the cv axles because I have tried new ones when it’s on the jack in the air it doesn’t happen but as soon as I Apply the brakes it clicks. Diff oil was also clean...
  12. Grizzly Chassis & Body
    New member here, my first post (besides introduction). So here is the story, I bought a new 2018 Yamaha grizzly 700 eps, rode it gently around the yard for the first 18hrs then did the break in oil change and filter, then we took it to Nevada and rode it a hundred miles or so, mostly trail...
  13. Grizzly Chassis & Body
    Had some clicking on both rear axles and discovered that both rear inner CV joints were leaking grease. When I removed the boots I was surprised to find that the grease was about the consistency of warm maple syrup, which is much thinner than I believe it should be. When I took the joint apart...
  14. Grizzly Chassis & Body
    Hi guys, Overhauling the rear diff on my 03 Griz and I'm having trouble beating the pinion bearing out of the housing. I'm using an "All Balls" kit from Royal. I beat the hell out of the pinion and it came out, but I'm having an issue with the bearing. I assume the gear on the diff side of...
  15. Kodiak/Big Bear/Bruin/Wolverine Discussion
    I have a 1987 Big Bear 350 that I am fixing up for bush use. After having it sit around for a month, I decided to move it to work on it and I noticed that it makes a grinding noise at higher speeds (or in high-range). However the noise isn't constant, only occurring at "x" amount of tire...
  16. Kodiak/Big Bear/Bruin/Wolverine Discussion
    So i got a 92 Big Bear 350 and im going through the whole thing. Ive had it for a few years and have not been easy on it. Yet she stills goes whereever i need it to. I checked my rear diff fluid and its full of mud etc. Im trying to remove the axle and im having no luck. I have not had any...
  17. Kodiak/Big Bear/Bruin/Wolverine Discussion
    So I bought this kodiak and the rear diff bearings and seals are all shot. I got the rebuild kit and wheel bearing kit and went to work. I'm stumped on one seal. It's in the housing and there's a sleeve holding it in. Anybody dealt with this that can tell me how to get the sleeve out? There's...
  18. General Discussion
    How do you get the drive shaft boss( number 7) off of the shaft (number 5)? Is it pressed on? It is a rear diff off a 660 grizzly and the driveshaft has stripped off the teeth inside the boss and its slipping
  19. General Discussion
    So like I have a 2009 grizzly 550 special edition and I've had it about a month and I was water riding (winter time) and I noticed a rear clicking in my atv it used to be just went I turn right but now it's constant anywere from 3-8 mph you can hear it popping or aggressive click I replaced all...
  20. Home Page Features
    Hi after just 100 miles on my 2009 (it sits at a remote location and sees little use) 450 the rear diff case has failed catastrophically. The drive shaft separated and took that part of the diff case with it. After getting the bike back 'on grid' I was in the process of removing the diff when I...
1-20 of 170 Results
Top