Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. New Member Introductions
    I had a engine rod go out on my 2008 Yamaha grizzly 700. What should I do now?
  2. Grizzly Engine & Transmission
    Greetings, Just bought a Grizzly 700 (with 815 stroker kit installed). There is an engine knock that i can't identify. I pulled the clutch and started it and it is still there. It's staring to look like it might be a rod knock. I wanted to get a second or third opinion before I started...
  3. Grizzly Engine & Transmission
    I'm doing a top end rebuild on a 02 Yamaha grizzly but not sure if i have to replace the piston rod as well due to wear. It feels smooth but is obviously scratched and pitted. I'm hoping a new crank is not necessary and appreciate any knowledgeable opinions. I don't know the history of the...
  4. Grizzly Tech Tips
    Changed tie rod on my 07 grizz 450 to beefier aftermarket. Set them to same size as old ones but found that the right side wheel points out as you look at it from front. So I set the tires straight then turned the right side tie rod out until it fit the knuckle slot. So one tie rod is now longer...
  5. New Member Introductions
    Hi Rod Fietz, welcome to the forum! Why not make this your first post and introduce yourself to us?
  6. Grizzly Engine & Transmission
    Rod noise or clutch noise (with video) So I just got a second grizzly, this one a 2009 700 it's on 29.5's with a clutch kit. Don't know what kind but was told so,plus it's pretty obvious. Is has a pretty pronounced low end rattle. Everyone that owners these quads is telling me "it's the clutch...
  7. Official Clutch Forum
    I ordered a JBS Hot Rod Sheave kit for my Grizzly 700 on Friday. 16gram weights and a purple spring. Getting excited waiting for it to arrive but I might have to wait a while before I can install it... but dang, it's gonna be sweet! :s_good: I was wondering if anyone had any tips or advise...
  8. Official Clutch Forum
    First off, let me say that this will be my first review on anything so bear with me. There will also be more to come, as I just did the install & only rode in my yard and up & down my street. I will do the typing & then try to edit the pics in from my phone cause that's the only way I know how...
  9. New Member Introductions
    Hi WV Hot Rod Rhino, welcome to the forum! Why not make this your first post and introduce yourself to us?
  10. General Discussion
    Guys (and Gals); the steering on my 08 350 IRS felt loose after my last ride so I gave each tie rod a wiggle and the left was moving (clicking) at the upper so new tie rod end I thought. But with the wheel off I saw that the threaded stud was wiggling in the castle nut. The cotter pin is still...
  11. Grizzly Chassis & Body
    Ok so riding today I bent a tie rod almost in half. Can anyone tell me what the length of the stock tie rods are? I am trying to see if I can order stock replacement ones or need to special order because of my lift. Mine are 16.5" for just the bar.
1-12 of 12 Results
Top