Grizzly Riders Forum banner
roller
1-10 of 10 Results
  1. Grizzly Engine & Transmission
    Need help... novice mechanic ... greying man trying to add ATV owner / repairer to his bucket list. Bought 98 Grizzly 600 which had been sitting in snow for 6 months. Needed new brakes, wheel bearings. When I removed the rear axle, there was oily crud in the bottom of both tubes so I decided...
  2. Official Clutch Forum
    I got fed up of the constant revving of the old 450, so changed the roller weights for 550 ones, to cut the revs down a bit, and perhaps save some! Somehow, this quad is now faster accelerating!!! Makes no sense to me, can anyone explain?? ANd weights are definitely heavier, and the quad...
  3. Official Clutch Forum
    can you mix roller weights?,,,say half 10 and half 14 grams? has anyone ever done this?
  4. Official Clutch Forum
    is anyone running the sliding roller weights and if so how is the low end dr.pulley advertise their is a lot and the lip pretty much takes care of the need to have a fiixed plate mod
  5. Official Clutch Forum
    Found out I had a leak in my cvt snorkle. . Changing the spring this weekend so I figured I would go ahead and switch some rollers up.. I wanna completely clean my primary and secondary.. and camplate..I'm sure the grease in there has got lord only knows what in it.. so question is.. after I...
  6. Official Clutch Forum
    Can somebody tell me the "stock" roller weight in a 700... And if I was to get a grease-less set from UTVCRAP what is the purpose of the spring that is included in the full setup? Oh.. and does anybody know if the grease-less sliders are included with the purchase of the weights ? (Probably...
  7. Official Clutch Forum
    First, just got my xtx dayco belt, is there a right dirrection to install it. Also, if you go with 4 diffferent weights in combo, iis it the same as getting 8 total weights that equal the same total grams?
  8. Official Clutch Forum
    Im just curious how many hours or miles you have put on your machine since installing greaseless roller weights in your clutch? I would especially like to hear feedback from people with ALOT of miles and if you have experianced any issues... I am planing to have my outer sheave machined pretty...
  9. Official Clutch Forum
    I just wanted to make all of you aware of some recent findings involved with the greasless sliders on the 700 Grizzlys. [At this point it appears to be only 700 Grizzlys - 660 & 450's are not included] Today - I was installing a UTV sheave & greasless conversion on Dan's (NJ09Grizz) 700 Grizzly...
  10. Official Clutch Forum
    I've read a lot about changing the roller weights in the primary to get better performance. However, what one feels is the "Performance" factor he likes, may not be to the next guys liking. I've also read a lot of charts put together & what brand roller weight weighed what .... the only problem...
1-10 of 10 Results
Top