Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 70 Results
  1. Official Clutch Forum
    Just got my new 2019 grizz 700 and ordered a set of STI HD 5 Beadlocks and 27x10x14 Zillas. Any advice on what shims and/or spring to run? Pros, cons, any advice is helpful. (I'm a newbie to clutch work) Not sure if a shim only is good enough or a spring to go with it!
  2. Grizzly Engine & Transmission
    Hi guys, I am rebuilding a carb for a friend for his 2000 Grizley 600. As I was re-installing the carb, I moved the starter set and the assembly separated and the spring jumped into oblivion. I have searched high and low for several hours and cannot find the spring. Does anyone have any...
  3. New Member Introductions
    Hello everyone I'm new here but was recommended by a friend, my father inlaw recently purchased a 2012 grizzly 550 and when he purchased it in the back seat was a gold clutch spring. I am wondering if it will fit my 2004 grizzly 660, and is there any way to determine what clutch it is intended...
  4. Home Page Features
    Read more about the Top 10 Spring ATV Maintenance Tips at
  5. Industry News
    Taylor Takes Pro-Am Class Victory in Minnesota * Ontario, California, July 2, 2014*-*ITP-backed ATV motocross racers won five classes and had a season-high 21 total podium finishes at round six of the 2014 Mtn. Dew ATV Motocross National Championship series held in Millville, Minn. ITP-supported...
  6. Official Clutch Forum
    Alright guys I've been doing a lot of looking into clutching my 2012 700 and over the last few months I've come to the understanding that your better off putting together your own custom kit. I have 27" kenda's and other than that it's stock. I use the rig to tow some logs, a little trail...
  7. Eastern Region Events
    Well its that time of year, figure id throw up a thread about a spring SSRT ride. This is for the very early stages, probably something in April. So far Tom and I are in for heading out there, anyone else showing interest feel free to chime in, throw dates around (i know its still early, lol)...
  8. Official Clutch Forum
    Greetings everyone. I was directed to this forum for some advice. I researched a little on here but seems the clutching info is endless. Most of the info seems to relate to the 550's and up. My son has a an 09 450, snorkeled, 2" lift, and otherwise stock machine. For Christmas I will be buying...
  9. Industry News
    CORONA, Calif., (July 29, 2013) - The annual AMA Pro Motocross stop at Spring Creek MX Park in Millville, Minn., greeted riders with unseasonably cool temperatures and even a touch of rain on Saturday, resulting in ideal conditions for the ninth round of the 2013 season. With the welcomed...
  10. Official Clutch Forum
    Just like the title says, should I get the purple or orange secondary spring for my grizzly 550? I'm putting on 26" Bearclaw HTR tires and dropping in 1.5mm of shims. What are the negatives of a stiffer secondary spring?
  11. Grizzly Engine & Transmission
    2005 grizzly 660. I somehow lost my spring that goes inside side diaphragm cover on carb. Does anyone know the size or how to get one at the hardware store? Parts place wants $25 for spring and new diaphragm. I am not paying that for a spring. Thanks for any help!
  12. Official Clutch Forum
    Anyone know where I can buy a purple EPI secondary spring in Canada for my 04 grizz 660? Thank you. Conrad
  13. General Discussion
    Anyone know where the hell i can buy a purple EPI clutch spring in Canada for my 04 grizz 660? thanks. Conrad
  14. Official Clutch Forum
    Secondary spring help, please! What's the strongest spring I can put on my bruin 350, epi only shows a green. Can I put a blue, orange or even a purple? Will they fit the same? I'm running tires that are way to big for the 350 so I'm trying to prevent slippage. They are 28x12 mudzillas rear and...
  15. Official Clutch Forum
    New to this Forum. Looking to put a shim in the Primary and possibly a stiffer spring in secondary. I have a 2011 Grizzy 700 with 28" mud lites and 14" ss wheels. What mm shim do you guys/gals recommend and what color spring? Also does anyone have a link to the sites that sell these...
  16. Official Clutch Forum
    Been reading a lot about clutches and am having coop do my primary so I thought what the heck might as well get a heaver spring for the secondary since I have 27" 528's, use it for food plot work, and I am not light either so trying to get the best low end I can. So I made up a spring...
  17. Official Clutch Forum
    Has anybody used the Torque Monster clutch kit before? If so, how did it perform? Also, I'm thinking my other option will be the EPI white spring with shims but I'm not sure which shim to get and where I can buy the spring! I didn't see it on Ebay, I only saw some for Polaris and Arctic Cat.
  18. Parts For Sale
    Practically new spring, only 197 miles on it. Too stiff for my setup, went with an orange. Asking $20 shipped, new ones are around $34 shipped from EPI. Feel free to make me offers. Sent from my ADR6350 using Tapatalk 2
  19. Pictures & Videos
    I thought I would just start a thread for everyone to post thier GR WV Spring ride pics and videos in, I know there were several helmet cams running on Saturday for sure. I'll get it started off.... Right around the 17 minute mark there's almost an accidental creek dismount on the 400ex,lol.
  20. Eastern Region Events
    I guess this is the right place to put this... <TD vAlign=top background=images/Backgrnd03.old>gr rules<TABLE border=0 cellPadding=2 width="100%" bgColor=#000000><TD bgColor=#000000> <TABLE border=1 cellSpacing=0 borderColorLight=#21100e borderColorDark=#1a1a1a cellPadding=2...
1-20 of 70 Results