Grizzly Riders Forum banner
stuck

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 27 Results
  1. Grizzly Talk
    2011 700, digital gas gauge stuck on full. Any ideas/help? Thanks, John.
  2. Pictures & Videos
  3. Grizzly Engine & Transmission
    Hey guys just want some pointers. I have my front end apart to replace my drive shaft due to well known fail issue with drive shaft. I am second owner of this 04 660 grizzly. As planed, when I moved my front diff forward the shaft fell out of coupler on motor side. But I cannot seem to get...
  4. Grizzly Engine & Transmission
    Maybe someone can help me! Got all the cover allen head bolts completely loose, along with the cam tensioner bolt which also seems to bolt to the cover. But I cannot get the cover to break loose. It's really stuck solid, checked and rechecked for additional bolts. Never had one that...
  5. Grizzly Electrical & Lighting
    Hi. I have a grizzly 700(2008 model) and it is stuck in 4wd. I've checked every relay under the front plastic, the fuse for 4wd is good and the handle bar switch has been replaced. I'm getting 10 volts to the servo motor with the engine off and switch on. I took the servo motor out and could not...
  6. Grizzly Tech Tips
    Just bought an 06 Grizzly 660. It was lightly used, good condition. I've been finding a puddle of gas underneath it when i come out in the morning, gas dripping from overflow tube tucked out from foot area. I'm assuming the float is stuck and gas is flowing out. I was considering taking...
  7. Grizzly Tech Tips
    I'm trying to remove a broken axle and replace it. I've done it on other models but never my yamaha. How do I get the large nut off the end? It has some sort of metal tab that fits into a groove that prevents it from spinning. I've even got an impact wrench in my friends garage and it won't...
  8. General Discussion
    My 2011 grizzly 550 has recently been hard to get into gear and now it just will not go into gear at all... Anybody have an idea what this could be?
  9. Grizzly Engine & Transmission
    I have a 2006 660 and the front dif stays locked in 4x4 mode. The digital picture showing the 4x4 mode goes out so the electronics seem to be working. You can here the motor when you push the 4x4 button but it does not release. I am a novice at ATV's but am mechanically inclined. Any help?
  10. Grizzly Talk
    Ok, I am trying to take off the front factory front plastic and bumper from my 2008 Grizzly and replace it with the Yamaha Brush Guard. I swear I have all the bolts removed but what apears to be one metal screw on each side that I can't figure a way to access. Anyone have any suggestions or...
  11. General Discussion
    GR Members, I'm looking for some ideas on how to get my choke out of the carb on my 2004 660 Grizzly? I did a little submarine last winter in a pond and I guess that was enough to corrode the end of the choke into the carb body. It has been sitting in Yamalube penetrating fluid for a few days...
  12. Official Clutch Forum
    Been reading a lot about clutches and am having coop do my primary so I thought what the heck might as well get a heaver spring for the secondary since I have 27" 528's, use it for food plot work, and I am not light either so trying to get the best low end I can. So I made up a spring...
  13. Grizzly Talk
    First post... I have a 2009 450 Grizzly. After plowing this winter I noticed no responce on the choke and it would not idle when it got warm. Plug was black and nasty. Removed carb, and what do you know, choke cable is rusted solid. I see it has a plunger but I can't get the darn thing out. Any...
  14. Pictures & Videos
    Ok this video is my getting stuck... No biggie... The first photo was what I looked like. 2nd and 3rd photo is me... 2 HOURS LATER!!! My winch crapped out, and a jeep couldn't pull me out!! Finally after digging around my front bumper trying to get it out of the mud, and pulling on it from a...
  15. Official Clutch Forum
    How well will a stock 09' 700 turn 30" mudlites? will probably go with 27.5 bighorns for everyday use / trailriding, and get either a set of 29.5" outlaw 2's or 30" backs for mudding. Is there a happy medium clutch set up for both my trail set of tires and my mud set?
  16. Grizzly Engine & Transmission
    I found the gear shifter on a new Grizzly 700 2011 difficult to engage and disengage. Am i missing something? --- I am here: http://maps.google.com/maps?ll=3.139046,101.682892
  17. Pictures & Videos
    Took the 700 and the 450 out this weekend. My son decided to see how close to the pond he could get before it got bad. He lost to the pond..... Took an hour and several "advisors" to get him unstuck. After we broke the suction we were able to "pop" him loose with a Rzr 900 XP. Uploaded with...
  18. Member's Rigs
    Well last night at 1:30am i got a call from my friend saying he was stuck and needed a pull. So being a good friend i figured i'd help him out. We get there, im pulling him out doing fine, move him 1-2 feet. Next time i go to pull his jeep, my truck jerks and slid to the left right into the...
  19. General Discussion
    So we went for a ride today at the mud hole we frequent. We had been there about 45 minutes and everything was cool. I dropped off into a mud hole that I have been in at least 25 times and on the way out I felt a jerk. I look back over my right shoulder and noticed my tire wasn't turning. I came...
1-19 of 27 Results
Top