Grizzly Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. General Discussion
    Long story short I had to disconnect my right front caliper to do some other work and now that it's all back together I need to refill and bleed that brake line. First time doing this and to the best of my knowledge the only two 'line ends' I'll need to work with are my right handlebar...
  2. Grizzly Talk
    So after my shim install, didn't really notice anything except lost top end. Even with 1.5mm of shim. No wheelies anymore either... odd. Then I sunk her last weekend. Cleaned oil, drained and dried out CVT, running again etc. Won't go over 30mph. Pulled the CVT open, cleaned all the grease...
  3. Grizzly Talk
    Just wanted to share a weird thing that happened today with our new 2011 Kodiak 450eps. It has about 500kms on it (300 miles). Anyways, we filled up the quads before we left today, then trailered them about 25 miles. Just got going, went about a half mile when the wife's Kodiak died. It would...
  4. Grizzly Tech Tips
    My plastic wheel ring on the back rear split at the bottom so the metal guide is rubbing on the rotor. I zip tied it together to keep it off the rotor but is this thing necessary? I can get a new one for $7.24 from motorcycle superstore.com
  5. Pictures & Videos
    2012 outlander 1000 -- gorilla lift dam thing looks like it is 6 feet wide
  6. Pictures & Videos
    went to put my clutch back together and i'm guessing this is the wrong belt. not sure what its from it was sent to me when i bought these new clutch parts was suppose to be from a 700 grizzly what would take a belt that short i put this one and my old one together and this is like 1 1/2...
  7. Grizzly Talk
    A good friend of mine recently decided he wanted another quad after not having one for a few years. He had owned a Honda rubicon but sold it and was in the market for something new. I had him meet me at the dealer I purchased mine. Like everyone else in these times he was trying to keep cost at...
  8. General Discussion
    It's not a grizzly but it's a good starter bike for a 5yr old. It's a Panther 80cc that I picked up for 160 needed a new battery and had to clean the carb. It had been sitting for a year. Hell it carried me up the hill in front of the house. Just thought I would share she's getting it this...
  9. General Discussion
    Is there anything else i can do for this site? I am already a site sponser,and try to awnser on every post that i can give advise on. So is there anything else i can do to help the site? :s_bye2:
  10. General Discussion
    Seems this old boy cruised thru a stop sign one day and ended up getting pulled over by a local policeman. The guy hands the cop his driver's license, insurance verification, plus his concealed carry permit... "Okay, Mr. Smith," the cop says, "I see your CCW permit. Are you carrying...
  11. Grizzly Tech Tips
    Lets use this topic to show the little things that improve our grizzlies. Home made mods, improvements over stock parts, y'all know the little tips n tricks that make these grizzlies improved over stock.
  12. Useless Info and BS
    anything at all. for me I would change the pronunciation of the number eight ( 8 ) to "sodomized." Why? Why is six afraid of seven? How bout you? oh and ib4 OMGKICKOBAMAOUTBAAAHHH
  13. Pictures & Videos
    Well heres a few clean pics before we go tomm.
  14. Official Clutch Forum
    Well, I took the 660 down to North American Warhorse in Dunmore, PA for a ripped belt and they called us today. They said that the clutch sheeves are bad. Of course, it's never just one thing when I take it down there. So, $600 right off the bat for the sheeves. But the thing me and my dad...
1-14 of 14 Results
Top