Search Results for ‘weights’

I cleaned my sliders and weights and regreased it all.. Installed a new belt and put it back together... It made a great improvement. However.. After an hour it jammed up and broke the belt.. The weights had came out and stuck in the sheave housing preventing it from moving. I had spline...

Hi, i have 2013 grizzly 700 se, I have ehs big 3 package currently. I just ordered 27" tires and new ss216 rims, also a epi purple spring, and 1.5mm shim. Now what I'm torn between is going to 18gram weights or 16gram. I want performance but I'm worried about fuel economy. My mileage took a...

Hi, I have a 2013 grizzly 700, currently have ehs air box, barkers slip on, and ehs programmer. I just ordered a new set of rims tires 27" CST abuzz and itp ss216's, epi purple spring, 1.5mm shim, and now looking into clutch weights, my 13' has 20 gram stock weights, i am debating between...

So after doing some reading here I've decided that I'm going to go with a 1.5 mm shim mod, grease less Slider weights, and a purple EFI Spring. my question is about the weights. Is 12 Grams too light? or should I only go down to the 14 Gram? Just about to place my order and wanted to check first...

ok guys i know this has been talked abut over and over. ive been doing research for weeks and iam still not convinced i know what i want yet. ive got a 2013 se 700 grizz with 25inch grim reaper tires. i do a lot of trail riding and occasional litttle mud holes and hill climbs. its by far no...

I got fed up of the constant revving of the old 450, so changed the roller weights for 550 ones, to cut the revs down a bit, and perhaps save some! Somehow, this quad is now faster accelerating!!! Makes no sense to me, can anyone explain?? ANd weights are definitely heavier, and the quad...

Alright guys I've been doing a lot of looking into clutching my 2012 700 and over the last few months I've come to the understanding that your better off putting together your own custom kit. I have 27" kenda's and other than that it's stock. I use the rig to tow some logs, a little trail...

To dry?something was makin a lot of noise...

Hey guys. After putting a few hundred miles on my 600 after the rebuild (i bought it blown up), I am very happy with everything except for the throttle response. Its not terrible, but it has a pretty bad lag at times. Im thinking lighter weights in the clutch, and clipping the slide spring may...

can you mix roller weights?,,,say half 10 and half 14 grams? has anyone ever done this?

I just bought a 02 660 grizzly recently and I went into the primary for whining reasons. Im coming to a conclusion that the weights were not put back in, just the covers. If this is the case, is there any possible damage that could of been done?

Just posted the Primary Sheave on Ebay guys. 2005 Yamaha Grizzly 660 Primary Clutch Sheave with weights | eBay The wet clutch with housing and 2 used one way bearings SOLD 660 Primary sheave $165.00 shipped (Alaska and Canada will be more) NO broken fins on sheave--I will toss in 2 bags of...

Stock tires 25x8x12 and 25x10x12 Ft height- 22 5/8" (at 5psi) R height- 23 1/2" Ft weight- 14.2 lbs (tire only) R weight- 18.4 lbs (tire only) Interco Reptiles in 26x9x12 and 26x11x12 Ft height- 24 3/4" (at 5psi) R height- 25" Ft weight- 24.4 lbs (tire only) R weight- 27.6 lbs (tire only)...

I was wondering if there was any reason why you can't use grease with the greaseless clutch weights? The greaseless weights are cheaper than any stock weights I can find and you can get them any weight.

Anyone got a full set of stock 450 clutch weights laying around they want to get rid of . Let me know:chillin:

18 Gram Clutch Weights FOR SALE (SOLD) Practically brand new. Paid over $40 shipped from cheap cycle parts. $25 (SOLD)

After a very slimy, muddy afternoon of mudbog races in Northholm (thanks Dan !!) I managed to pry most of the cement like clay and grass from the belly of my Grizz, then decided to check the clutch out to see how the greaseless rollers were holding up,and to see how much mud/water it had...

:boxing: OK, This might be a bad idea, BUT, I was thinking about how the lighter clutch weights work by keeping the shives from throwing out as fast...and after reading a bunch of info on here about adding lighter weights to the clutch, What do you guys think about drilling a 1/4" hole all the...

is anyone running the sliding roller weights and if so how is the low end dr.pulley advertise their is a lot and the lip pretty much takes care of the need to have a fiixed plate mod

i have a 2007 grizzly 700 eps i have change my oem tires to 25.5" pitbull growlers 6 ply mounted on high lifter xl2 wheels and i have installed a oni filter before the tire change the griz would pop wheelies in high gear now when i floor it wont seems to have loss some low end power because of...