Grizzly Riders Forum banner
winch
1-20 of 126 Results
Advanced
  1. Grizzly Accessories
    So I took the motor off the winch with the 2 bolts that hold it on to look it over. When I went to put it back on, the bolts have nothing to screw back into, I tried to turn the winch to see if the alignment moved but not the case. Am I missing something, lol I feel like a dummy but can't figure...
  2. Grizzly Accessories
    I just got a 07 Griz 450. I want to get a snow plow for it and reading on this excellent site about what you guys use. I saw a you tube video where a guy bought a plow only to discover it wouldn't work with the specific model# of Warn winch he has so he had to buy a new winch. I don't want...
  3. New Member Introductions
    Hey how's it going guys I'm new to the forum and just seeing how things work mainly. I also have a question what would you guys recommend winch wise for my 02 660. I like to have something reliable, stout, and if at all possible nothing priced to outrageous. anxious to hear back!
  4. Grizzly Engine & Transmission
    My mother has just developed a fairly serious case of sciatica, which is a condition where you have some serious leg pain as the result of a pinched sciatic nerve. One of the exercises she does in physical therapy is simply the therapist holding onto her foot and pulling away from her hips as...
  5. Grizzly Accessories
    I have a 02 660 how do I make the winch work when it is in gear. Right now it only works in neutral and park. My neutral light does not work so it only works in park. Any advice on ether situation would be great.
  6. General Discussion
    Putting in a SW Terra 35 and I've decided the crimp I'm looking at here isn't something I can reproduce so I need to figure out who to take this wire to get the end put back on after I get it shortened to where I need it. Never having delt with wires this big I have no idea who I could go to...
  7. Grizzly Accessories
    well went to use my winch (3500k viper) and had a ton of problems. this blame corded hand control where it plugs into the bike keeps loosing contact. come to find out the 3 male plugs inside the connector keeps pushing in the plug hsg. I fought this for a hour and was very frustrating. its brand...
  8. Grizzly Electrical & Lighting
    Well i have searched and read about the different setups on this forum but im still having issues, so any help would be greatly appreciated. I have a 700 grizz with an earthX battery under the seat to power the warn wireless. I am using a blue sea battery isolation relay and have hooked...
  9. Grizzly Talk
    I recently put a plow on the front of my 2010 Grizzly. I am using it on some commercial properties. So it gets a lot of use when it snows. The cable has broken a couple times. Was wondering what everyone on here uses. Or do I just have to deal with it.
  10. Grizzly Tech Tips
    Does anyone know if a Super winch Terra 25 will fit on my 2011 Grizzly 450?? I want to buy one but don't know if it will fit. Please help!
  11. Grizzly Accessories
    Hello Everyone, I just picked up a '11 450 EPS for my wife with 16 hours on it...it's great! But, no winch included. I'm having fittment problems with the larger winches and I'm interested in what all of you 450 owners have and what you like (along with what mount used). I know there was just...
  12. Grizzly Talk
    Hey all I was thinking about getting a cable stop for my Warn 2500 on my '05 Grizz 660. I guess I'm sick of taking the fairlead apart and straightening it out when I bring the hook in too far. I saw these rubber bumpers on Ebay and was just wondering if they help...and which one I should go...
  13. Grizzly Accessories
    I just installed a badlands 2000lb winch on my Polaris700twin. Iv had one on my daughters bayou300 for 3yrs and have used it a lot without any problems. I had a coupon and got it for around $50 and purchased a 2yr warranty. For the price its hard to beat them and they seem to last, the one on...
  14. New Member Introductions
    the winch motor is turning however the cable will not move. I am trying to get the winch out and don't know what needs to come off to get winch out. is it possible to repair while still mounted? or do I need to remove? thanks, chris
  15. Grizzly Accessories
    I have a Symtec 4 zone controller and have heated grips, thumb heater, and seat heater installed on my 2011 Grizz 700. I used the Symtecs for my first winter season and all of,the sudden the controller went on the fritz and froze up - no ability to control temp on each zone or switch zones...
  16. Motosport.com
    Tell us what winch you run! If you're shopping around for a winch for your ATV CLICK HERE or check out a couple of our best sellers below. Superwinch Terra 35 Winch With Cable RopeStandard Features Powers Load IN and OUT. Automatic 100% load holding brake. Full metal, 3-Stage Planetary...
  17. Grizzly Accessories
    THOUGHT YOU FELLAS MIGHT LIKE THIS WEB SITE FOR GETTING QUALITY REPLACEMENT WINCH ELECTRICAL PARTS LIKE CONTACTORS,CONTROLERS ETC. ALOT CHEAPER THAN THE WINCH MFG'S. SELL AND THERE THE SAME COMPONENTS. JUST TRYING TO HELP AS YOU FELLAS SURE HAVE HELPED ME A "BUNCH" JUST NOTICED THEY EVEN SELL...
  18. New Member Introductions
    I'm looking for a decent winch for my 2011 grizzly 450. I like what I'm reading about the Super winch Terra 25, but I don't know if it will fit my 450?? Thanks
  19. Grizzly Tech Tips
    Anybody use or have used a Traveller winch? I got a brand new one from tractor supply for christmas and was looking for any pros, cons, do's, don'ts, and anything about a mounting bracket/ plate I should use..
  20. Grizzly Electrical & Lighting
    I,am installing my new viper 4K winch and i have a couple questions. 1. the winch contactor that came with my new viper 4k wiinch looks real cheesey on the mounting area side, it mounts with 2 - 3/16"bolts off center and with 2 small plastic mounting tabs. this is a heavy for its size part and...
1-20 of 126 Results
Top