Grizzly Riders Forum banner
work
1-20 of 42 Results
  1. POWERSPORTSiD
    Specialists working at PCI Race Radios are designing and putting together high-quality, weather- and impact-resistant intercoms, helmets, radios, and GPS units for professional racers to communicate with teammates and team leaders. Using more than 45 years of experience in the field, the company...
  2. Grizzly Talk
    When i turn on my key the dash lights up green and thats it nothing else works no numbes and no lights light up on the left where it shows what gear your in. Ive have checked fuses.
  3. New Member Introductions
    HI guys my name is mike i have a 2005 grizzly 660 hunter edition I am having an issue with my starter button not working. First of all i just got this atv and am new to grizzly's for the little time i rode i loved it plenty of power and the 4x4 is great very fun. so i got the atv of some guy...
  4. Grizzly Electrical & Lighting
    just want someone to verify my conclusions and i would appreciate any recommendations for parts. just bought my atv, is a 2008 grizz 450 4x4. guy i bought it from just installed a new battery, looked clean and not abused. i rode it around for 30 minutes or so and nothing seemed odd and...
  5. Grizzly Electrical & Lighting
    I have a 07 450. I noticed one of the axle seals on the rear diff leaked a bit while parked for the winter. This weekend I decided to change the diff seals, clean the carb, and adjust the valves. I did the diff seals yesterday. Took it for a quick spin afterwards. All was good, no leaks...
  6. Grizzly Engine & Transmission
    I looked through several threads on grizzly 700 / raptor 700 top end parts, but i have not found out what im looking for. Any help is appreciated! Ok i bought a grizzly last night, the timing chain is stretched pretty bad, and the cam needs to be replaced. I was leaning on the raptor 700...
  7. New Member Introductions
    live play and work on my families tree farm. Farm has a mid to late 90s 400 griz that runs great love the full axle rear suspension (play, specially in the snow). I do have a few bugs to work out, looking to see what you all think could help. Iam more than some what mechanical, mainly I need...
  8. Grizzly Dyno/Tuning
    So I have an 07 grizzly 700 it has a miss in the low idle. I have hmf slip on, clutch kit, and 27" tires. So....when I tried to get into the c0 screen, it wouldn't. Am I missing something? Please give me some info on this
  9. Official Clutch Forum
    Hey guys, Just put new 27" Kenda executioners and love them! They dig down, bite hard and look sweet. But they are a heavy tire and I lost a lot of snap in the low end. Top end they took away a few MPH but who needs to do 65 through the middle of the woods. I've been doing some looking into...
  10. Industry News
    Can-Am has definitely impressed us in the past few days with some of the new product lines like the Commander MAX 1000 and the Maverick 1000R X mr.* But let's not forget that on the same day Can-Am made the reveal of the Outlander 6×6 ATV. This purpose-built ATV features industry-leading power...
  11. Grizzly Engine & Transmission
    How much do u think it would cost and is there any good shops central ohio? I am wanting to go with bigger valves and new springs and seals at the same time.(1900 miles) 07' Z71/08' Grizzly 734cc
  12. Grizzly Engine & Transmission
    I did a little porting to my head just smoothed everything up now im ready to go back together, what do I do to get the head clean and make sure all the shavings are gone before a reassembly my head? Just for a little info im going with stock bore je 11.1 piston, hot cams stage 2 raptor cam...
  13. Official Clutch Forum
    Hey everyone, I've been reading through a lot of the threads here on clutch mods and its a lot to take in lol. I recently installed some 27in ITP Mega Mayhems and wanted to do clutch work to make up for my low end. I want to do JBS sheave, but its a lot of money to spend after buying these...
  14. Official Clutch Forum
    I have been reading and looking over a lot of the weight and shim mods for the grizzly but am still not clearly understanding what I would need exactly or the simplest options available. I plan on running 28x9.5x14 front and 28x11x14 rear or the 29.5x9.5x14 on all four corners. I am looking...
  15. Pictures & Videos
    Hey all, Not sure if anyone has posted a thread about this, but let's see some pic/vids of your Grizzly at Work... Pulling trailers, pulling folks out of a ditch, plowing snow, etc. What have you used your Grizzly for today ? Scott
  16. Grizzly Electrical & Lighting
    2011 grizzly 550 Brake light doesn't work ,running light ok. Bulb ok power to rear socket power to switchs on handle bar no light anybody no what's going on
  17. Industry News
    The following is a story from Greg Mumm's Turn the Tide 2012 Tour for Access. Find more stories like this one chronicling his epic journey across the United States at http://www.WeAreBRC.org One of the really cool things that has happened on this trip is that time and again the timing has often...
  18. Grizzly Talk
    will the h4 (9003) bulbs wrk for my grizzly 700 2012 there 55w..and stock is 35w.. i just want to know if they will get too hot..i just dont feel like waiting ordering from piaa..lol...these bulbs are at walmart and autozone
  19. Official Clutch Forum
    I just recently put on some 27" tires, new heavy-duty belt and an EPI clutch kit on my '06 660... after getting the bike back from the shop I immediately experenced problems.... When the bike is in "H" it cannot produce enough power to climb a small mound, got it up to 50+mph, it took awhile &...
  20. Grizzly Dyno/Tuning
    Hey people, I have a situation I can't figure out. It's my carb of course....some history? I HAD an HMF exhaust, standard Uni filter, Dynojet 150 main, Dynojet needle on fourth ring down. I had some issues and figured out I had a tear in both diafragms. I fixed those and the bike ran pretty...
1-20 of 42 Results
Top