Grizzly Riders Forum banner

Was This Tutorial Helpful?

  • Yes

    Votes: 24 100.0%
  • No

    Votes: 0 0.0%
141 - 142 of 142 Posts
Are you saying just the nut is spinning, or the whole shaft and sheave assembly? If you are using an impact you should be able to hold the sheave while breaking the nut loose. If you are not using an impact you need to rig up something to keep the sheave from moving. Could use a strap or some of these suggestions in this thread....

http://grizzlyriders.com/forums/off.../7109-primary-sheeve-holding-tool-option.html
Thanks for that info butch

One of my friends is going to let me borrow his compressor and impact tomorrow! so both sheaves off and disassembled, inspected and then decide what to about with my clutching
 
141 - 142 of 142 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top