When Purchasing Your Wheel Bearings

8317 Views 4 Replies 4 Participants Last post by mudder69, Jul 21, 2014

Ztkirkpatric

Discussion Starter · Feb 25, 2011

Alrighty guys... I did some researching because i'm a cheapo and did not want to spend 65 dollars PER BEARING for my Grizzly 660...

I have found the OEM bearings for around 12 dollars... I have seen places online that offer them at around 8 dollars... Not sure about shipping though..

DO NOT BUY YOUR BEARINGS FROM YAMAHA

Go to Kawasaki and ask for part number 92045-0123

This are the bearings for a Teryx.... They are made by KOYO
(Same as OEM GRIZZ BEARINGS)
When Kawasaki dealership pulls up this part number they will see
Bearing DAC 3055w

When I picked these up the side of the bearing said
KOYO DAC 3055w-3

I have installed them and all the measurements are the same... THIS IS THE SAME BEARING FOR A FRACTION OF THE COST...

Kawasaki Part - 92045-0123
Bearing DAC 3055w

Save

Reactions: 5

1 - 5 of 5 Posts

rob350

· #2 · Feb 25, 2011

Perfect!

I would like to point out that these will work for the 03+ 660's, and the 550's and 700's. (they all take the same bearing)
Sorry 02 660 guys, your bearings are different.

How did the seals look? Just as good?

Save

Reactions: 1

GRIZZLY77

· #3 · Feb 25, 2011

?X2 on Rob

Save

Ztkirkpatric

Discussion Starter · #4 · Feb 25, 2011 (Edited)

rob350 said:
Perfect!

I would like to point out that these will work for the 03+ 660's, and the 550's and 700's. (they all take the same bearing)
Sorry 02 660 guys, your bearings are different.

How did the seals look? Just as good?

See less See more

Save

Reactions: 5

mudder69

· #5 · Jul 21, 2014

you are correct about the kaw bearing numbers, i have been using them for years, i get from partszilla .com cost i believe is about 9 bucks.

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month